Wax NDI Operator - Howmet Aerospace
Wichita Falls, TX 76301
About the Job
Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.comQUALIFICATIONS:
BASIC QUALIFICATIONS:
• High School Diploma or GED from an accredited institution.
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
PREFERRED QUALIFICATIONS:
• Experience working in a manufacturing environment
• Basic Computer skills
• Knowledge of Wax OperationsQUALIFICATIONS:
BASIC QUALIFICATIONS:
• High School Diploma or GED from an accredited institution.
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
PREFERRED QUALIFICATIONS:
• Experience working in a manufacturing environment
• Basic Computer skills
• Knowledge of Wax OperationsJOB SUMMARY:
NDI operators are responsible for the following skills: Inspection, Engraving, Wall Gauge, X-Ray (GE/DR). Trainees must successfully complete written and practical assessment of skills/knowledge at end of skills training.
ESSENTIAL FUNCTIONS:
• Basic Computer Applications
• Must be able to read and interpret Product Criteria (PC) and Activity Instructions (AI).
• Must be able to function as a member of a team and be able to work under general supervision.
• Must be able to maintain expected quality levels.
• Comply with all site required policies and procedures including but not limited to: EHS, Quality, Code of Conduct and the Wichita Falls Employee Handbook.
JOB RESPONSIBILITIES:
1. X-ray - Inspect patterns for core breaks
2. Log pieces into X-ray Log Book
3. Care and maintenance for X-ray badge
4. Wall gauge
5. Train to use Golden Spike and V374 Transducer
6. Sign out transducer in Log Book
7. Perform Audits, Fill out Audit Log Sheet
8. Inspect and Log Wall gauge and X-ray data into IPC
9. Communicate scrap issues with Die Tech, Team Leader and Supervisor
10. Set engraver depth
11. Engrave T.I.D.
12. Log issues in engraver book
13. Flex from x-ray to wall gauge or engraving as needed
14. Meet workflow and efficiency expectations
15. Distribute patterns to cell when time permits
16. Performs other duties as required.
17. Complies with all EHS rules related to the work environment.
18. Works Overtime as required.
19. Follows 5S rules and procedures.
20. Utilize help chain when needed. (Human Performance, BOLO)
PHYSICAL DEMANDS/EQUIPMENT USED
1. Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Employee is required to execute the following:
• Stair climbing.
• Reaching near, far and overhead.
• Pushing pulling, twisting and handling.
• Be able to lift from floor-to-waist, waist-to-chest and chest-to-overhead
• Be able to finger press, use a keyboard, mouse and tolerate hand/arm vibration
• Gripping and Pinching
• Carry items with two hands.
• Carry items with one hand.
• Work requires moderate physical effort including prolonged standing.
• Squatting/crouching/bending when retrieving stored items from lower shelves, moving equipment and product inspections.
• lifting >5 Lbs.
• Must pass Jaeger I eye exam.
2. Training:
• Each level takes minimum of 90 Days
• Pass written and proficiency test for each skill set.
• Completed Training Folder
3. Equipment Used:
• Hot Plates
• Hand tools
• Engraving Machine
• X-Ray Unit
• Gauging Fixtures
4. Work Environment:
• Works in air-conditioned area.
• Slight exposure to chemicals, fumes, oil, dust, noise and heat or cold.
MEDICAL SURVEILLANCE REQUIREMENTS
• VisionJOB SUMMARY:
NDI operators are responsible for the following skills: Inspection, Engraving, Wall Gauge, X-Ray (GE/DR). Trainees must successfully complete written and practical assessment of skills/knowledge at end of skills training.
ESSENTIAL FUNCTIONS:
• Basic Computer Applications
• Must be able to read and interpret Product Criteria (PC) and Activity Instructions (AI).
• Must be able to function as a member of a team and be able to work under general supervision.
• Must be able to maintain expected quality levels.
• Comply with all site required policies and procedures including but not limited to: EHS, Quality, Code of Conduct and the Wichita Falls Employee Handbook.
JOB RESPONSIBILITIES:
1. X-ray - Inspect patterns for core breaks
2. Log pieces into X-ray Log Book
3. Care and maintenance for X-ray badge
4. Wall gauge
5. Train to use Golden Spike and V374 Transducer
6. Sign out transducer in Log Book
7. Perform Audits, Fill out Audit Log Sheet
8. Inspect and Log Wall gauge and X-ray data into IPC
9. Communicate scrap issues with Die Tech, Team Leader and Supervisor
10. Set engraver depth
11. Engrave T.I.D.
12. Log issues in engraver book
13. Flex from x-ray to wall gauge or engraving as needed
14. Meet workflow and efficiency expectations
15. Distribute patterns to cell when time permits
16. Performs other duties as required.
17. Complies with all EHS rules related to the work environment.
18. Works Overtime as required.
19. Follows 5S rules and procedures.
20. Utilize help chain when needed. (Human Performance, BOLO)
PHYSICAL DEMANDS/EQUIPMENT USED
1. Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Employee is required to execute the following:
• Stair climbing.
• Reaching near, far and overhead.
• Pushing pulling, twisting and handling.
• Be able to lift from floor-to-waist, waist-to-chest and chest-to-overhead
• Be able to finger press, use a keyboard, mouse and tolerate hand/arm vibration
• Gripping and Pinching
• Carry items with two hands.
• Carry items with one hand.
• Work requires moderate physical effort including prolonged standing.
• Squatting/crouching/bending when retrieving stored items from lower shelves, moving equipment and product inspections.
• lifting >5 Lbs.
• Must pass Jaeger I eye exam.
2. Training:
• Each level takes minimum of 90 Days
• Pass written and proficiency test for each skill set.
• Completed Training Folder
3. Equipment Used:
• Hot Plates
• Hand tools
• Engraving Machine
• X-Ray Unit
• Gauging Fixtures
4. Work Environment:
• Works in air-conditioned area.
• Slight exposure to chemicals, fumes, oil, dust, noise and heat or cold.
MEDICAL SURVEILLANCE REQUIREMENTS