Travel CT Tech in Dover, DE at Patterns LLC

General Summary:

Under the direction of the Site Manager and CT Scan Supervisor, demonstrates competency and actively functions in CT/General Radiology procedures.

Responsibilities:

1. Prepares procedure room and patient for all studies. Properly disinfect all equipment after each patient, following cleaning policies and protocols. All dirty linen should be disposed and replaced after every patient. Monitor patient flow for efficient daily operations.
2. Educates patient regarding ordered procedure and answers any related questions. Obtain patient history and written consent for exam. Verify patient information, check for appropriate ICD-9/10 codes. Utilize appropriate patient safety screening/consent forms to ensure all safety precautions have been addressed prior to procedure.
3. Performs procedures in accordance with established protocols. Positions patients and selects appropriate equipment necessary to accomplish procedure depending upon the age of the patient and the physical capabilities. Monitors patient during procedures; notifies Radiologist of reactions or problems. Assist the radiologists when necessary. Every effort must be made to minimize patient discomfort.
4. Demonstrate competency on all general diagnostic imaging equipment in CT. Ensure quality images for all completed procedures prior to releasing patient by reviewing films or sending images to the PACS System, depending on type of procedure. Imaging QA’s should be less than 2% per month.
5. Carries out duties and assumes responsibility for portions of the quality assurance program, as directed by the equipment vendors. Maintain competence with HIS, RIS, PHS and PACS.
6. Run a pending work report daily to ensure all exams have been properly charged. PACS and HIS errors are closely tracked and reported on PI reports following the QA policy. The individual error rate should be less than 2%.
7. Maintain adequate supplies. Responsible for stocking the room, as assigned, at the beginning of each shift and throughout the day to ensure that the room is always ready to perform the required procedures. Be aware of supply needs and par levels, and report all items that fall below par level to the designated person.
8. All other duties as assigned within the scope and range of job responsibilities.