Sr. Mechanical Design Engineer - Blue Origin
Denver, CO 80201
About the Job
At Blue Origin, we envision millions of people living and working in space for the benefit of Earth.
We’re working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion.
Join our diverse team of problem solvers as we add new chapters to the history of spaceflight! This role is part of the New Shepard program.
New Shepard is a reusable suborbital rocket system designed to take astronauts and research payloads past the Kármán line – the internationally recognized boundary of space.
Through operational reusability, New Shepard supports our mission of lowering the cost of access to space.As part of a hardworking team of diverse engineers, you will provide a wide range of expertise and serve as a technical conscience for flight control and mechanical systems of the New Shepard reusable launch vehicle.
You will participate in the entire design cycle including system architecture, requirements derivation, conceptual and detailed design, system performance modeling, structural analysis, manufacturing and integration support, development testing, and qualification.
You will define component groups (e.g., actuators, mechanisms, valves, manifolds, piping, and sensors) including design, specification, procurement, processing, testing, and discrepancy resolution of specific components.
Additionally, you will identify and implement design changes to improve system reliability and reduce operational cost, participate in verification audits of existing components and subsystems, and participate in component and subsystem level testing including planning, execution, data reduction, and analysis.
Finally, you will coach, mentor, and technically assist other specialists and team members.
We are looking for someone to apply their technical expertise, leadership skills, and commitment to quality to positively impact safe human spaceflight.
Passion for our mission and vision is required! Minimum QualificationsBachelor of Science degree in Engineering.8+ years of hydraulic systems design experience including:Selecting, sizing, and designing flow, direction, and pressure control valves including check, proportional, servo, relief, counterbalance, etc.Selecting, sizing, and designing cylinder actuators including double acting, spring extend/retract, double rod, etc.Designing hydraulic systems of moderate complexity with components including valves, actuators, manifolds, accumulators, pumps, reservoirs, sensors, etc.Creating and interpreting Piping & Instrumentation Diagrams (P&ID).Performing flow and pressure calculations to size systems and components.Experience in 3D CAD programs such as NX, CATIA, SolidWorks, Creo, Pro/E, etc.Proficiency in analysis including hand calculations and Finite Element Analysis.Strong written and verbal communication skills.Ability to earn trust, maintain positive and professional relationships, and contribute to a culture of inclusion.Must be a U.S.
citizen or national, U.S.
permanent resident (current Green Card holder), or lawfully admitted into the U.S.
as a refugee or granted asylum.Preferred Qualifications:Proficiency with Creo, Windchill, and Ansys.Familiarity with typical aerospace hydraulic standards and best practices.Use of common aerospace structural materials and surface treatments.Hands-on experience with machining, building, testing, and maintaining hydraulic components and systems.Experience with GD&T (ASME Y14.5).Experience designing and testing mechanisms for deployment, locking, positioning, or similar applications for high-reliability systems.Experience with test instrumentation and data acquisition.Experience with engineering support of field operations.Experience with root cause analysis.Experience with high voltage systems.Compensation Range for:CO applicants is $125,480.25-$175,672.35;WA applicants is $136,467.00-$191,053.80Other site ranges may differApplications will be accepted on an ongoing basis until the requisition is closed.Inclusivity StatementDon’t meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification.
At Blue Origin, we are dedicated to building a diverse, inclusive, and authentic workplace, so if you’re excited about this role but your past experience doesn’t align perfectly with every desired qualification in the job description, we encourage you to apply anyway.
You may be just the right candidate for this or other roles.Export Control RegulationsApplicants for employment at Blue Origin must be a U.S.
citizen or national, U.S.
permanent resident (i.e.
current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BenefitsBenefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program.Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays.Discretionary bonus: Bonuses are designed to reward individual contributions as well as allow employees to share in company results.Eligibility for benefits varies by role type, please check with your recruiter for a comprehensive list of the benefits available for this role.Equal Employment OpportunityBlue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified, diverse, and dedicated work force.
Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities.
We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork, in which all employees recognize and appreciate the diversity of individual team members.
We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, gender, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law.
Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws.
For more information on “EEO Is the Law,” please see here.Affirmative Action and Disability AccommodationApplicants wishing to receive information on Blue Origin’s Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at
We’re working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion.
Join our diverse team of problem solvers as we add new chapters to the history of spaceflight! This role is part of the New Shepard program.
New Shepard is a reusable suborbital rocket system designed to take astronauts and research payloads past the Kármán line – the internationally recognized boundary of space.
Through operational reusability, New Shepard supports our mission of lowering the cost of access to space.As part of a hardworking team of diverse engineers, you will provide a wide range of expertise and serve as a technical conscience for flight control and mechanical systems of the New Shepard reusable launch vehicle.
You will participate in the entire design cycle including system architecture, requirements derivation, conceptual and detailed design, system performance modeling, structural analysis, manufacturing and integration support, development testing, and qualification.
You will define component groups (e.g., actuators, mechanisms, valves, manifolds, piping, and sensors) including design, specification, procurement, processing, testing, and discrepancy resolution of specific components.
Additionally, you will identify and implement design changes to improve system reliability and reduce operational cost, participate in verification audits of existing components and subsystems, and participate in component and subsystem level testing including planning, execution, data reduction, and analysis.
Finally, you will coach, mentor, and technically assist other specialists and team members.
We are looking for someone to apply their technical expertise, leadership skills, and commitment to quality to positively impact safe human spaceflight.
Passion for our mission and vision is required! Minimum QualificationsBachelor of Science degree in Engineering.8+ years of hydraulic systems design experience including:Selecting, sizing, and designing flow, direction, and pressure control valves including check, proportional, servo, relief, counterbalance, etc.Selecting, sizing, and designing cylinder actuators including double acting, spring extend/retract, double rod, etc.Designing hydraulic systems of moderate complexity with components including valves, actuators, manifolds, accumulators, pumps, reservoirs, sensors, etc.Creating and interpreting Piping & Instrumentation Diagrams (P&ID).Performing flow and pressure calculations to size systems and components.Experience in 3D CAD programs such as NX, CATIA, SolidWorks, Creo, Pro/E, etc.Proficiency in analysis including hand calculations and Finite Element Analysis.Strong written and verbal communication skills.Ability to earn trust, maintain positive and professional relationships, and contribute to a culture of inclusion.Must be a U.S.
citizen or national, U.S.
permanent resident (current Green Card holder), or lawfully admitted into the U.S.
as a refugee or granted asylum.Preferred Qualifications:Proficiency with Creo, Windchill, and Ansys.Familiarity with typical aerospace hydraulic standards and best practices.Use of common aerospace structural materials and surface treatments.Hands-on experience with machining, building, testing, and maintaining hydraulic components and systems.Experience with GD&T (ASME Y14.5).Experience designing and testing mechanisms for deployment, locking, positioning, or similar applications for high-reliability systems.Experience with test instrumentation and data acquisition.Experience with engineering support of field operations.Experience with root cause analysis.Experience with high voltage systems.Compensation Range for:CO applicants is $125,480.25-$175,672.35;WA applicants is $136,467.00-$191,053.80Other site ranges may differApplications will be accepted on an ongoing basis until the requisition is closed.Inclusivity StatementDon’t meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification.
At Blue Origin, we are dedicated to building a diverse, inclusive, and authentic workplace, so if you’re excited about this role but your past experience doesn’t align perfectly with every desired qualification in the job description, we encourage you to apply anyway.
You may be just the right candidate for this or other roles.Export Control RegulationsApplicants for employment at Blue Origin must be a U.S.
citizen or national, U.S.
permanent resident (i.e.
current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BenefitsBenefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program.Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays.Discretionary bonus: Bonuses are designed to reward individual contributions as well as allow employees to share in company results.Eligibility for benefits varies by role type, please check with your recruiter for a comprehensive list of the benefits available for this role.Equal Employment OpportunityBlue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified, diverse, and dedicated work force.
Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities.
We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork, in which all employees recognize and appreciate the diversity of individual team members.
We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, gender, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law.
Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws.
For more information on “EEO Is the Law,” please see here.Affirmative Action and Disability AccommodationApplicants wishing to receive information on Blue Origin’s Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at
EEOCompliance@blueorigin.com.California
Applicant Privacy NoticeIf you are a California resident, please reference the CA Applicant Privacy Notice here.SummaryLocation: Seattle, WA; Denver, COType: Full time
Source : Blue Origin