Source Inspector- Mechanical - TRIGO ADR Americas

Hayward, CA

About the Job

The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations.

Job Functions:

Experienced quality individual in dimensional and visual inspection of aerospace machined components
Experience in performing FAI’s – AS9102 (The SI will verify supplier’s FAI, not perform them)
Experience with hand measurement tools
Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required)
Knowledge and experience in GD&T (ASME Y14.5)
Knowledge and experience with blueprint interpretation
Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection)
Other duties as assigned.

KNOWLEDGE, SKILLS AND ABILITIES

Experienced quality individual in dimensional inspection of aerospace machined components
Experience in performing FAI’s – AS9102
Experience with hand measurement tools
Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required)
Knowledge and experience in GD&T (ASME Y14.5)
Knowledge and experience with blueprint interpretation
Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection)
MS Outlook, and EXCEL experience
Mechanical inspection experience.
IPC, J-STD, and Mil-Spec inspection experience. Such as IPC-600 or IPC-610

Skills:

Strong verbal, written and communication skills
Fluent English – reading and writing is required
Professionalism, integrity, and exceptional attention to detail
Strong independent decision-making skills; excellent analytical skills and professional judgment
Excellent interpersonal, written, and verbal communication skills
Knowledge of basic computer skills, include basic Excel skills - must pass Excel test

Ability to:

Work as an effective team member
Establish and maintain effective working relationships
Fluent English – reading and writing is required
Pass pre-hire background check including DMV and credit screening
Pass Pre-hire Drug Screening Supervision Received
Valid drivers license and auto insurance required.
The work is performed under general supervision
U.S. Citizenship required

Preferred Education and Skills (including certifications):

3 years’ experience as a quality inspector, technician, or engineer.
3 years’ experience in an aerospace manufacturing facility
3 years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation
Proficient with Microsoft Outlook and Excel
Effective communication skills
Detail oriented
Any combination of education and experience may be considered
Prior practical experience and implementation of Quality inspection tools and equipment. Experience in RCCA, and problem-solving a plus

Additional Qualifications (Preferred):

The General Vision Acuity Test shall be performed by an Oculist, Optometrist, or other professionally recognized person. The following requirements shall apply.
• Near Vision – Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches)
• Far vision – Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50
• Color Perception – 6 of 9 Orthorater plates US or International citizenship or permanent residence status required depending on work location.
Valid Driver’s License
Valid Auto Insurance

WORKING CONDITIONS
Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction.
Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time.
Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others.
Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers.
Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime.
The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high.

BENEFITS:

12 days paid vacation first year, increasing with service years
10 days paid sick time
11 paid holidays
Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents
401k with match

Pay Range: $25 - $40 hourly Please note that the salary information is a general guideline only. SMS/Trigo considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.

Company Overview

TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results.

TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors.

Source : TRIGO ADR Americas