Source Inspector - TRIGO ADR Americas
Long Island, NY
About the Job
The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations.
Job Functions:
- Experienced quality individual in dimensional and visual inspection of aerospace machined components
- Experience in performing FAI’s – AS9102 (The SI will verify supplier’s FAI, not perform them)
- Experience with hand measurement tools
- Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required)
- Knowledge and experience in GD&T (ASME Y14.5)
- Knowledge and experience with blueprint interpretation
- Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection)
- Other duties as assigned
KNOWLEDGE, SKILLS AND ABILITIES
- Experienced quality individual in dimensional inspection of aerospace machined components
- Experience in performing FAI’s – AS9102
- Experience with hand measurement tools
- Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required)
- Knowledge and experience in GD&T (ASME Y14.5)
- Knowledge and experience with blueprint interpretation
- Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection)
- MS Outlook, and EXCEL experience
- Mechanical inspection experience preferred
- IPC, J-STD, and Mil-Spec inspection experience preferred. Such as IPC-600 or IPC-610
- Valid drivers license and auto insurance required.
Skills:
- Strong verbal, written and communication skills
- Fluent English – reading and writing is required
- Professionalism, integrity, and exceptional attention to detail
- Strong independent decision-making skills; excellent analytical skills and professional judgment
- Excellent interpersonal, written, and verbal communication skills
- Knowledge of basic computer skills, include basic Excel skills - must pass Excel test
Ability to:
- Work as an effective team member
- Establish and maintain effective working relationships
- Fluent English – reading and writing is required
- Pass pre-hire background check including DMV and credit screening
- Pass Pre-hire Drug Screening Supervision Received:
- The work is performed under general supervision
- U.S. Citizenship required
Preferred Education and Skills (including certifications):
- 3 years’ experience as a quality inspector, technician, or engineer.
- 3 years’ experience in an aerospace manufacturing facility
- 3 years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation
- Proficient with Microsoft Outlook and Excel
- Effective communication skills
- Detail oriented
- Any combination of education and experience may be considered
- Prior practical experience and implementation of Quality inspection tools and equipment. Experience in RCCA, and problem-solving a plus
Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction.
Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time.
Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others.
Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers.
Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime.
The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high.
Benefits
- CHAMP PLAN WELLNESS and HEALTH
- Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings
- Participation increases net take home pay $$$ in most instances
- Free wellness initiatives
- Free tele-health
- Free and discounted RX
- Auto enrollment (unless tax elections result in negative impact)
- Eligible on the 1st of the month following 30 days of continuous employment
- requires monthly 10-minute wellness activity participation
- 401k retirement savings with match
- Eligible on the first (1st) of the month following 90 days of continuous employment
- 100% match of 1st 3% contribution
- 50% match of next 2% contribution
- IMMEDIATE VESTING
- Paid Sick time
- Company-provided cell phone, laptop, mobile wi-fi (for business use only)
- Regular Hourly rate for travel time
- Direct Pay Travel arrangements for flights, hotels and rental cars
- Travel Reimbursements direct deposited with each payroll
- Federal rate Mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business
- Per diem reimbursements for meals and incidentals
- Overnight trips - Up to $75
- Leaving home after 4 pm $40
- Federal rate mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business
- Direct Pay Travel arrangements for flights, hotels and rental cars
- Travel Reimbursements direct deposited with each payroll
- Per diem reimbursements for meals and incidentals
- Overnight trips - Up to $75
- Leaving home after 4 pm $40
- $1500 EMPLOYEE REFERRAL BONUS
- Initial $750 paid upon hire of qualified referred employee (rehires excluded)
- Additional $750 paid upon referral’s full completion of 90 days’ employment
Company Overview
TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results.
TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors.
Powered by JazzHR