Reliability Development Engineering - Engineer - Artech LLC
San Diego, CA 92121
About the Job
Job Description: (Updated) Top 5 Required Skills
1. Product Reliability Test knowledge (HTOL, ESD, Latch-up, MSL, Temperature cycle, bias HAST, HTS)
2. HTOL hardware design and script bring up- verification.
3. PMIC ESD and latch-up setup experience
4. Burn-in oven (MCC, INCAL experience)
5. Fab and assembly process knowledge
Technologies (systems, tool, hardware, software that would be good to find on resume)
" Incal systems HWs and software experience
" Scripts/vector debug
Specific Keywords (systems, experience, anything that would be good to find on resume)
" Product reliability
" HTOL
" ESD
" Latch-up
" MSL
" Temperature cycle
" bias HAST
" HTS (High Temperature storage)
Education Requirement
" Bachelors degree in Electrical Engineering or higher, with Semiconductor Device Physics and VLSI design experience
Minimum years of Experience Required
" MUST HAVE 2 years' experience generating device qualification plans, performing reliability risk assessment as well as device level failure analysis.
" MUST HAVE 4+ years experience with EIA/JEDEC/AEC standards for device qualification and test methods
" MUST HAVE 5 years experience supporting reliability evaluation on Digital/RF products (micro-processor, network processor with embedded memory
Job Overview - Principal Duties and Responsibilities
Successful candidate will be tasked for Product, Package reliability test tracking; reliability database, data analysis and summarization on a regular basis for commercial, industrial and/or automotive application Product reliability evaluation/qualification/monitor planning, execution and tracking for on-schedule product launch/monitor support Customer product reliability requirements database creation and management.
Additional Skills:
" Strong IT/database experience/ skills Familiar with CMOS as well as Mixed Signal and RF/Analog circuit reliability stress techniques including HTOL, ESD and Latch-up.
" Knowledge of device physics, IC fabrication, packaging technology and automotive (e.g. AEC-Q100) reliability qualification criteria
Physical Requirements (maximum push, pull, lift weight limits in lbs.)
" List of requirements? (list out or state none)) n/a
" Max lbs.: n/a
Driving Requirements
" Are there driving responsibilities no matter how minimal with this role? n/a
" If yes, how many hours per week? 0
Comments for Suppliers
" How many rounds of interviews should be expected? 1-2
" Interview Method? Client Teams (First interview expectations: Be prepared to speak basic JEDEC and AEC-Q100 standards)
" Work Location: Bldg WT - 5745 Pacific Center Blvd San Diego, CA 92121
" Work Requirement: Red- 100%
" Shift: 1
" Work Days: Mon-Fri
" Shift Time: ~8:30am - 4:30pm PST (open flexibility)
" Hours: 40
Comments for Suppliers:
1. Product Reliability Test knowledge (HTOL, ESD, Latch-up, MSL, Temperature cycle, bias HAST, HTS)
2. HTOL hardware design and script bring up- verification.
3. PMIC ESD and latch-up setup experience
4. Burn-in oven (MCC, INCAL experience)
5. Fab and assembly process knowledge
Technologies (systems, tool, hardware, software that would be good to find on resume)
" Incal systems HWs and software experience
" Scripts/vector debug
Specific Keywords (systems, experience, anything that would be good to find on resume)
" Product reliability
" HTOL
" ESD
" Latch-up
" MSL
" Temperature cycle
" bias HAST
" HTS (High Temperature storage)
Education Requirement
" Bachelors degree in Electrical Engineering or higher, with Semiconductor Device Physics and VLSI design experience
Minimum years of Experience Required
" MUST HAVE 2 years' experience generating device qualification plans, performing reliability risk assessment as well as device level failure analysis.
" MUST HAVE 4+ years experience with EIA/JEDEC/AEC standards for device qualification and test methods
" MUST HAVE 5 years experience supporting reliability evaluation on Digital/RF products (micro-processor, network processor with embedded memory
Job Overview - Principal Duties and Responsibilities
Successful candidate will be tasked for Product, Package reliability test tracking; reliability database, data analysis and summarization on a regular basis for commercial, industrial and/or automotive application Product reliability evaluation/qualification/monitor planning, execution and tracking for on-schedule product launch/monitor support Customer product reliability requirements database creation and management.
Additional Skills:
" Strong IT/database experience/ skills Familiar with CMOS as well as Mixed Signal and RF/Analog circuit reliability stress techniques including HTOL, ESD and Latch-up.
" Knowledge of device physics, IC fabrication, packaging technology and automotive (e.g. AEC-Q100) reliability qualification criteria
Physical Requirements (maximum push, pull, lift weight limits in lbs.)
" List of requirements? (list out or state none)) n/a
" Max lbs.: n/a
Driving Requirements
" Are there driving responsibilities no matter how minimal with this role? n/a
" If yes, how many hours per week? 0
Comments for Suppliers
" How many rounds of interviews should be expected? 1-2
" Interview Method? Client Teams (First interview expectations: Be prepared to speak basic JEDEC and AEC-Q100 standards)
" Work Location: Bldg WT - 5745 Pacific Center Blvd San Diego, CA 92121
" Work Requirement: Red- 100%
" Shift: 1
" Work Days: Mon-Fri
" Shift Time: ~8:30am - 4:30pm PST (open flexibility)
" Hours: 40
Comments for Suppliers:
Source : Artech LLC