Process Engineer - TechDigital Corporation
Madison, GA 30650
About the Job
Process Engineer
Job Description
Note: This position is for Covington and Madison sites.
SUMMARY
The Process Engineer has the responsibility and authority for designing, implementing maintaining and improving all regional sterilization processes, process data gathering, and maintenance document control processes as needed. The Process Engineer will identify and implement process related improvement activities with the intent to reduce and minimize non conformances and events. The Process Engineer will be responsible for monitoring, all equipment uptime, KPI, OEE goals, cost improvement and lean activities.
ESSENTIAL DUTIES AND RESPONSIBILITIES including the following. Other duties may be assigned.
Assists in, maintenance and improvement of the sterilization process system along with measuring, and tracking facilities department KPIs. Updates department procedures and applicable ISO documentations as needed.
Responsible for process system activities for all sterilization processes to maximize process capability on equipment performance.
Identify areas of process improvement (include safety related improvements and labor efficiency related process improvements) to reduce and minimize process related nonconformance incidents and to maximize efficiency of the process.
Responsible for improving processes to ensure that all equipment uptime is tracked and measured along with monitoring and measuring sterilization OEE.
Provides informative process performance reports and trending to Management through data analysis tools and other techniques. Trains technicians on usage of systems as needed.
Initiates, plans, executes, and closes out projects as assigned and assists QA in disposition of equipment/process non-conformances, including documentation of corrective actions and/or acceptance rationale and Engineering comments.
Must be available for "Engineering on call activities in the future.
Performs other duties as assigned.
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed herein are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
EDUCATION and/or EXPERIENCE:
Bachelors of Science Degree in Engineering required. Also required, 5+ years of applicable experience and a thorough understanding of a wide variety of engineering systems. Candidate is preferred to have worked in FDA regulated manufacturing environment as well as have experience implementing, developing, and maintaining process/projects. PSM-related industry experience is a plus. CAD experience is preferred.
LANGUAGE SKILLS:
Must be able to read and comprehend simple instructions in Basic English and write short correspondence / memos. Must be able to effectively present information in one-on-one and small group situations to staff, internal customers and other employees within the organization.
MATHEMATICAL SKILLS:
Ability to apply mathematical concepts such as geometry, trigonometry, exponents, etc. Ability to apply mathematical operations to tasks such as facility design, process line location and layout.
REASONING ABILITY:
Position requires good logic and reasoning ability. Ability to define problems and find logical solutions. Ability to interpret specifications and technical instructions. In summary, position requires a high degree of logical analyzing. Errors in the facility or process design bring heavy liability and financial burden to the Company. Errors in safety equipment could bring loss of life. Position interfaces heavily with outside
PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel. The employee is occasionally required to stand and reach with hands and arms and lift and/or move up to ten pounds. Employee is required to meet with other personnel in other areas of building. Specific vision abilities required by this job include close vision.
WORK ENVIRONMENT:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
During the performance of this job, the employee may be in hot and humid locations, near moving mechanical parts, high places, risk of electrical shock, work with explosive gas, toxic and caustic chemicals, or experience loud noise (maintenance shop, forklift equipment, and construction). Must be available for "on call activities.
Job Description
Note: This position is for Covington and Madison sites.
SUMMARY
The Process Engineer has the responsibility and authority for designing, implementing maintaining and improving all regional sterilization processes, process data gathering, and maintenance document control processes as needed. The Process Engineer will identify and implement process related improvement activities with the intent to reduce and minimize non conformances and events. The Process Engineer will be responsible for monitoring, all equipment uptime, KPI, OEE goals, cost improvement and lean activities.
ESSENTIAL DUTIES AND RESPONSIBILITIES including the following. Other duties may be assigned.
Assists in, maintenance and improvement of the sterilization process system along with measuring, and tracking facilities department KPIs. Updates department procedures and applicable ISO documentations as needed.
Responsible for process system activities for all sterilization processes to maximize process capability on equipment performance.
Identify areas of process improvement (include safety related improvements and labor efficiency related process improvements) to reduce and minimize process related nonconformance incidents and to maximize efficiency of the process.
Responsible for improving processes to ensure that all equipment uptime is tracked and measured along with monitoring and measuring sterilization OEE.
Provides informative process performance reports and trending to Management through data analysis tools and other techniques. Trains technicians on usage of systems as needed.
Initiates, plans, executes, and closes out projects as assigned and assists QA in disposition of equipment/process non-conformances, including documentation of corrective actions and/or acceptance rationale and Engineering comments.
Must be available for "Engineering on call activities in the future.
Performs other duties as assigned.
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed herein are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
EDUCATION and/or EXPERIENCE:
Bachelors of Science Degree in Engineering required. Also required, 5+ years of applicable experience and a thorough understanding of a wide variety of engineering systems. Candidate is preferred to have worked in FDA regulated manufacturing environment as well as have experience implementing, developing, and maintaining process/projects. PSM-related industry experience is a plus. CAD experience is preferred.
LANGUAGE SKILLS:
Must be able to read and comprehend simple instructions in Basic English and write short correspondence / memos. Must be able to effectively present information in one-on-one and small group situations to staff, internal customers and other employees within the organization.
MATHEMATICAL SKILLS:
Ability to apply mathematical concepts such as geometry, trigonometry, exponents, etc. Ability to apply mathematical operations to tasks such as facility design, process line location and layout.
REASONING ABILITY:
Position requires good logic and reasoning ability. Ability to define problems and find logical solutions. Ability to interpret specifications and technical instructions. In summary, position requires a high degree of logical analyzing. Errors in the facility or process design bring heavy liability and financial burden to the Company. Errors in safety equipment could bring loss of life. Position interfaces heavily with outside
PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel. The employee is occasionally required to stand and reach with hands and arms and lift and/or move up to ten pounds. Employee is required to meet with other personnel in other areas of building. Specific vision abilities required by this job include close vision.
WORK ENVIRONMENT:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
During the performance of this job, the employee may be in hot and humid locations, near moving mechanical parts, high places, risk of electrical shock, work with explosive gas, toxic and caustic chemicals, or experience loud noise (maintenance shop, forklift equipment, and construction). Must be available for "on call activities.
Source : TechDigital Corporation