Preventative Maintenance Technician - Micro Precision

GENERAL JOB FUNCTION

The calibration technician is responsible for maintaining, testing and calibrating the variety of instruments and equipment; Ensures that all instruments, meters and test devices are calibrated correctly and perform accurate readings. Comply with the Policy and Quality Manual (QM), Description of the System of Calibration (CSD) of MPC and the internal work regulations.

DUTIES AND RESPONSIBILITIES

• Responsible for calibrating variety of test instruments for one or more skill areas, such as:

Ø Electrical Equipment

Ø Dimensional Equipment

Ø Industrial / Mechanical Equipment

Ø Temperature Equipment

Ø RF/Optical Equipment

Calibration Process

• Implement the applicable requirements, customer requirements, QM and CSD.
• Conducts pre-evaluation and inspections to all customer equipment such as visual checking, cleaning, functional and self-testing.
• Ensures that maintenance, minor repair and calibration of equipment are carried out and completed based on the set schedule in accordance with customer specifications and requirements.
• Communicates the status and proper calibration updates to the concerned personnel or group on a timely manner; regularly collaborates with other technicians, CSRs, Sales and Purchasing.
• Analyzes data, uncertainty computation, uploading of data and report generation. Ensure that all calibration data is accurate and sufficient to take into account for complete reproducibility.
• Ensures compliance to quality standard based on existing and approved quality procedures.
• Protect and complement the documentation pertinent to the work of the field service, including documentation on the abuse or misuse of instruments, worksheets and laptops.
• Ensure that environmental conditions are adequate for the work performed in house and at customer facility.
• Ensure that the sensitivity of the environmental conditions and accuracy of the records in the values ??shown are relevant in the calibration certificates.
• Ensure that the version used of the calibration procedure is the most recent and suitable for the instrument under test.
• Transport the instruments (customer and MPC), including reference standards, reference materials, software and hardware, so that it does not adversely affect the accuracy of the instrument does not degrade the net value of the instrument.
• Notify the Quality Assurance Manager, the customer, Division Manager and Sales Manager when an instrument is lost, damaged at any point of the service, or stolen having it under the protection of MPC.
• Ensure that the nomenclature and identification of the instruments is accurate and complete in CMS assuring it match with instrument identification.
• Ensure that calibration certificates contain accurate information and that all information required by the client is documented in the report.
• Verify reported results, used calibration procedures, approved functions, reference standards used and identification of traceable patterns for accuracy and reproducibility.
• Ensure the safe handling, use and transport of customer and MPC equipment at all times during field service work.
• Seek supervision and / or assistance from the customer to operate and / or calibrate the customer's equipment which is installed, assembled and / or configured in the operation line.
• Study the equipment configuration, the operation process and the safety features of the unit before calibration, as long as it is part of an assembly of the machine or a production line.
• Protects and completes the necessary documentation related to field work, including the documentation in the worksheets, field service order form, abuse, misuse and / or mishandling of instruments and equipment, as well as laptops and computers.
• Ensure that the calibration data is accurate and sufficient to allow a complete reproducibility.
• Participate or support during accreditation or customer assessments as required.
• Perform the activities of qualified technician in calibration and / or repair according to the list of authorized technical capacity qualification.
• Everyone has the responsibility to initialize corrective actions as require or applicable for work in process.
• Technician has the responsibility to stop work operation any time non-conformity is identify; Reports non-conformity to immediate superior, Lab Manager, Sales & CSR that was identified during the pre-evaluation and inspection process.

Other

• Performs standards maintenance & checking of company standards if assigned by Lab Manager.
• Travels regionally or out of the country to perform field calibration work if assigned by Lab Manager.

• Continues to be trained in all aspects of MP Calibration Services and shares gained knowledge and other best practices with the rest of the members of the team.

• Works with the Department in setting general goals and develops, supports and implements plans to hit identified targets; recommends improvement to support current operation and related processes.

Observes safety precautions and quality standard in the performance of task and complies with the company directives and policies; observes proper communication practices and manages confidentiality of information within and outside the group.

QUALIFICATION REQUIREMENTS

The professional qualifications required and the experience necessary to effectively complete the responsibilities of this position.

Education:

- Educational attainment gained from Technical or other related courses, preferably in Metrology, Instrumentation, Electronics or its equivalent

Training:

- Complete the QMS exams 101, 102, 103, 104, 105, 201 and 401 with 70% minimum score.

- ESDC Teamsite Module, to be completed within 3 days of commencing employment.

- System / Software development system / Software modification.

- Qualification and Certification.

Work Experience:

- Minimum 2 year of experience (electronic for electronic technology; dim / mech for dim / technology

- Experience in basic instrumentation and manual tools.

Knowledge, Skills and Ability:

• Demonstrates good verbal communication, good written skills
• Knowledgeable in calibration procedures, computation of uncertainty and computer applications.
• Must have keen eye for quality and details, basic problem solving techniques.
• Familiar with techniques and tools associated with ISO/IEC 17025.
• Team player, Trustworthy, Service oriented and can manage priorities.
• Ability to drive four-wheel vehicle (w/ valid driver's license) is an advantage.

COMMITMENT TO IMPARTIALITY

MP is committed to the principles of impartiality as described in Micro Precision's Quality Manual and Standard Operating Procedures. Employee shall not to be influenced by financial, commercial or other pressures when conducting services while employed by Micro Precision and will take action to address any situation that may affect impartiality. Employee understands that he/she has an ongoing obligation to disclose any potential conflicts of interest that may arise during employment with Micro Precision.

PIe8248022fe33-31181-35742696