Powder Coater Painter - Agile Staffing, Inc

Role:

Loads and unloads parts from the Paint Line. Checks the quality of the painted parts from the line. Responsible for quality checks both cosmetic and first/last piece inspection. Reports questionable parts found to supervisor immediately. Paints and touches up the parts on the paint line through a prescribed manner.

Main Job Duties and Responsibilities:

· Loads and un-loads parts on the paint line conveyor. Properly hang all parts ensuring parts are firmly connected to conveyor lines.

· Frequently changes the paint hooks and hanging racks

· Checks the quality of the paint job and that paint is adhering properly.

· Assist with cleaning of spray booths after and prior to color changes and normal cleaning schedules.

· Moves the material and parts to the next location on the paint line.

· Conducts complete changeovers of the paint booths and guns, and cleans the system.

· Conducts first piece inspections of the new parts prior to and after curing oven.

· Ensures that all material handling equipment are staged.

· Must be able to perform at least 4-5 different functions around the paint line.

· Responsible for maintaining a clean and safe work area consistent with company’s housekeeping and safety policies.

· Inform area management of any hazardous situations in the work environment.

· Is willing to be cross-trained in at least one other assembly area.

· Starts equipment necessary for painting. Examines the powder flow and powder hopper to ensure that it is working properly. Checks the color of the paint.

· Is responsible for checking set ups for each run of parts. It is required to make changes if necessary to ensure proper outcome.

· Examines paint guns to ensure that they are working properly and that there no clogs.

· Assist with cleaning of spray booths after and prior to color changes and normal cleaning schedules.

YEARS OF EXPERIENCE:

Minimum of 1-years of experience

KNOWLEDGE AND SKILLS:

· Ability to follow instructions

· Properly organized

· Understanding of ISO procedures and adherence to such procedures

SPECIAL REQUIREMENTS/DEMANDS (e.g. PHYSICAL):

· Ability to stand for the entire shift

· Ability to lift up to 40 pounds

· Able to perform repetitive job functions, hand mobility, bending, kneeling, pushing, and pulling

· Exposure to paint dust and fumes within safe limits

· Tolerate a non-temperature controlled environment (may reach over 100 degrees during summer months)

· Able to work overtime when required

· Able to work a flexible work schedule (as needed)

PERSONAL PROTECTIVE EQUIPMENT REQUIRED TO BE WORN:

· Hearing protection (as required)

· Eye protection (safety glasses required)

· Protective work Steel toe boots.

· Respirator

Temp to Hire

lc