Painter - Turner Industries

This listing is for Painter positions at our Pipe Fabrication Shop in Paris, TX.

Job does not pay per diem

Job Description:

Works under the direction of a foreman, to apply coats of paint on fabricated piping or like materials as required per paint matrix.

Functional Requirements:

Read and sign off on JSA prior to starting shift; smooth surfaces using sand paper, screen wire, DA sander, and scrappers; paint fabricated piping or like materials per spool sheet using spray guns, brushes or rollers; may set up ladder to perform task above ground level; performs daily inspection of tools used; knows and follows the proper disposal method in place for paint and thinner; maintains a clean and safe work environment at all times.

Qualification Standards:

• Preferably one (1) to four (4) years of experience in specified skill.
• Pre-employment/post-employment qualification test if applicable.
• Post-offer drug/alcohol screen and physical evaluation.
• Turner Industries Group/Job site orientation/Hazard Communication and required tests.
• Job site "Personal Protective Equipment" requirements (hearing protection, safety glasses, OSHA approved Z87 if applicable, long sleeve shirt, gloves, steel toe boots, etc.).
• Applicant/employee must not pose a direct threat to the health or safety of such individual or others in the workplace.

Essential Job Duties and Responsibilities

Level C - Demonstrated proficiency in the following with consideration of prior experience:

• Basic knowledge of paint equipment (paint guns, epoxy paints, etc.)
• Ability to exhibit simple spray techniques.
• Ability to accurately read film gage.
• Comprehensive knowledge of sketch system - 15 gray.
• Ability to assess cleanliness of pipe/prime coat regulator.
• Knowledge and understanding of the DFT (Dry Film Thickness) - list of special instructions.
• Complete an average of 1500 square ft. per day with minimal repair.

Level B - In addition to level C qualifications and experience, demonstrated proficiency in the following:

• Knowledge and understanding of matrix.
• Spraying epoxy and urethanes
• Operation of wet film mill gauge
• Developing techniques spraying color contrast & multiple paints
• Successfully spraying at production rates acceptable to QC inspection with a minimum of 6 months experience
• Complete an average of 1800 square ft. per day with minimal repair.

Level A - In addition to level B qualifications and experience, demonstrated proficiency in the following:

• Complete an average of 2400 square ft. per day with minimal repair.

Physical Involvement

Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; crawling; seeing with or without correction; hearing with or without correction

Mental Involvement:

Employee may be required to do the following: following set procedures and standards; applying basic mathematical skills; planning work and selecting proper tools; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawing or diagrams using standards that can be measured or checked; following oral and/or written directions, plans and blueprints; reading; writing; ability to recognize and report safety hazards

Work Environment Factors:

• Location: industrial construction sites and/or fabrication shop
• Mobility Barriers to Access Job Site: uneven ground levels; obstructed pathways; work performed at low and/or high elevations; work performed in confined areas
• Climatic/Environmental Conditions at Job Site: predominately outdoor climate; may be exposed to extreme hot or cold weather, excessive humidity, rain, etc.; various noise levels caused by tools, machinery, equipment, etc.; potential exposure to chemical substances.

Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law.