Maintenance QC Inspector - Akima
Fort Stewart, GA
About the Job
Overview
This Maintenance QC Inspector implements quality control and safety plans to ensure compliance with contract specifications and applicable regulations, inspects all phases of a variety of goods, services or operation for conformity to established quality, health and safety, and other operational standards by performing on-going work for compliance with contractual provisions; ensures all performance metrics listed in the performance requirement summary are performed in a satisfactory manner, specifies areas to be inspected (scheduled and unscheduled) and how often inspections will be accomplished, communicates deficiencies to proper persons, maintains Quality Control files, and document results of all inspections. To join our team of outstanding professionals, apply today!
Responsibilities
+ Ensures that equipment, performance and quality conform to established company and regulatory standards governed in the Government Quality Assurance Surveillance Plan (QASP), Technical Manuals (TMs), Technical Bulletins (TBs), Lubrication Orders (LO), Modification Work Orders MWO), Safety of Use Messages (SOUM) and Maintenance Advisory Messages (MAM).
+ Completes reports on quality discrepancies (QDR) related to fault diagnosis, assembly, process, mechanical, electrical, electro-mechanical and hydraulic systems.
+ Investigates problems and develops disposition and corrective actions for recurring discrepancies.
+ Interfaces with manufacturing, customer, vendor and subcontractor representatives to ensure requirements are met.
+ Utilizes Test Measurement and Diagnostic Equipment (TMDE) to ensure compliance of parts from vendors and manufacturers.
+ Research required repair parts and records on DA Form 5988E for ordering and installation.
+ Responsible for initial, in-process and final inspections and for the quality throughout the maintenance process. Responsible for rejection of defective workmanship.Completes Estimated Cost of Repairs (ECOR) and Estimated Cost of Damages (ECOD) as required.
+ Classifies equipment based on maintenance expenditure limits (MEL).
+ May supervise repairs to ensure quality standards are met and conduct or supervise joint inspections with owning unit customer representatives.
+ Performs trend analysis on failures and quality deficiencies found.
+ Advises the Maintenance Manager on the man-hour to task analysis, cost estimates for repair and the repair parts sustainment issues that hinder the quality and timeliness of product delivery to the customer.
+ Ensures compliance with ISO 9001-2015 procedures to define and document the process used for Maintenance Procedures in support of the Installation Maintenance Division (IMD) AFSBn-Stewart for Fort Stewart and Hunter Army Airfield, Georgia.
+ Recommends corrective actions, dispositions and modifications for above mentioned work.
+ Maintenance QC will perform daily inspections of contractor and/or carrier performance of completed maintenance actions for compliance with DOD and Service Regulations and Performance Work Statement requirements.
+ Maintains tools and equipment and clean work areas to maintain a safe work environment.
+ Ensures that all tasks are performed safely and meet Government/Army standards.
+ Performs other duties as required to support the mission and contractual requirements.
Qualifications
+ Must be a U.S. citizen.
+ Have 4-6 years of QC Inspector experience in the grade of E-6 or civilian equivalent.
+ Must possess a working knowledge of the appropriate tools necessary to perform maintenance tasks as well as have knowledge of standardized maintenance regulations – specifically DA Pam 750-8, Functional User’s Manual for The Army Maintenance Management System (TAMMS).
+ High School Diploma or GED certificate.
+ Must comply with OSHA, EPA, Fire Regulations and published Company work rules.
+ Excellent written and oral communications skills; proficient in Microsoft Office Suite.
+ Excellent attention to detail.
+ Ability to complete and prioritize tasks on multiple concurrent projects within given timeframes.
+ Work well in a team environment and able to work with a diverse group of people.
+ Discretion and trustworthiness, due to frequent contact with confidential material.Communicate with co-workers, management, clients and all others in a courteous and professional manner.
+ Conform with and abide by all regulations, policies, work procedures, and instructions.
+ Must possess working knowledge of the Army Enterprise Systems Integration Program (AESIP), Global Combat Support System – Army (GCSS-A) application software as well as TACOM-Unique Logistics Support Applications (TULSA).
+ Must be able to pass a background security investigation as well as drug/alcohol screening prior to employment.
+ Must be able to obtain a Common Access Card (CAC) within 30 days of employment.
+ Must have operational/maintenance knowledge on a variety of military platforms to include M1 Abrams models, M109 Paladin models, M2/M3/M7 Bradley models, M88A2 Recovery Vehicle, XM1150 ABV, HMME-I, M1074/1075/1120 FOV, JLTV FOV, HEMMT FOV, HMMWV FOV as well as a variety of Ground Support Equipment and trailers.
+ Required to maintain a valid state-issued Driver’s license and applicable Government/Army license.
Desired Qualifications:
+ U.S Army Military Occupational Specialty (MOS) 91 series.Quality Inspector Certification (CQI) issued by the American Society for Quality (ASQ) or equivalent organization.Certification from the National Institute for Automotive Service Excellence (ASE) or equivalent organization.
Physical Demands:
+ Must be capable of lifting, carrying, pushing, pulling very heavy parts and loads.
+ Must be able to climb, crawl, stoop, bend, squat, and reach as required to work on equipment.
+ Be able to work outside in inclement weather conditions when necessary.
+ Wear safety items of Personal Protective Equipment (PPE) e.g. gloves, safety shoes, protective eyewear, hearing protection, and other items as appropriate.
We are an equal opportunity employer and comply with all applicable federal, state, and local fair employment practices laws. All applicants will receive consideration for employment, without regard to race, color, religion, creed, national origin, gender or gender-identity, age, marital status, sexual orientation, veteran status, disability, pregnancy or parental status, or any other basis prohibited by law. If you are an individual with a disability, or have known limitations related to pregnancy, childbirth, or related medical conditions, and would like to request a reasonable accommodation for any part of the employment process, please contact us at job-assist@akima.com or 571-353-7053 (information about job applications status is not available at this contact information).
Job: Maintenance & Repair
Travel: None
Organization: AFO - Akima Facilities Operations
Clearance: Not Applicable
Work Type: On-Site
Remote: No
ReqID: 2024-12547
This Maintenance QC Inspector implements quality control and safety plans to ensure compliance with contract specifications and applicable regulations, inspects all phases of a variety of goods, services or operation for conformity to established quality, health and safety, and other operational standards by performing on-going work for compliance with contractual provisions; ensures all performance metrics listed in the performance requirement summary are performed in a satisfactory manner, specifies areas to be inspected (scheduled and unscheduled) and how often inspections will be accomplished, communicates deficiencies to proper persons, maintains Quality Control files, and document results of all inspections. To join our team of outstanding professionals, apply today!
Responsibilities
+ Ensures that equipment, performance and quality conform to established company and regulatory standards governed in the Government Quality Assurance Surveillance Plan (QASP), Technical Manuals (TMs), Technical Bulletins (TBs), Lubrication Orders (LO), Modification Work Orders MWO), Safety of Use Messages (SOUM) and Maintenance Advisory Messages (MAM).
+ Completes reports on quality discrepancies (QDR) related to fault diagnosis, assembly, process, mechanical, electrical, electro-mechanical and hydraulic systems.
+ Investigates problems and develops disposition and corrective actions for recurring discrepancies.
+ Interfaces with manufacturing, customer, vendor and subcontractor representatives to ensure requirements are met.
+ Utilizes Test Measurement and Diagnostic Equipment (TMDE) to ensure compliance of parts from vendors and manufacturers.
+ Research required repair parts and records on DA Form 5988E for ordering and installation.
+ Responsible for initial, in-process and final inspections and for the quality throughout the maintenance process. Responsible for rejection of defective workmanship.Completes Estimated Cost of Repairs (ECOR) and Estimated Cost of Damages (ECOD) as required.
+ Classifies equipment based on maintenance expenditure limits (MEL).
+ May supervise repairs to ensure quality standards are met and conduct or supervise joint inspections with owning unit customer representatives.
+ Performs trend analysis on failures and quality deficiencies found.
+ Advises the Maintenance Manager on the man-hour to task analysis, cost estimates for repair and the repair parts sustainment issues that hinder the quality and timeliness of product delivery to the customer.
+ Ensures compliance with ISO 9001-2015 procedures to define and document the process used for Maintenance Procedures in support of the Installation Maintenance Division (IMD) AFSBn-Stewart for Fort Stewart and Hunter Army Airfield, Georgia.
+ Recommends corrective actions, dispositions and modifications for above mentioned work.
+ Maintenance QC will perform daily inspections of contractor and/or carrier performance of completed maintenance actions for compliance with DOD and Service Regulations and Performance Work Statement requirements.
+ Maintains tools and equipment and clean work areas to maintain a safe work environment.
+ Ensures that all tasks are performed safely and meet Government/Army standards.
+ Performs other duties as required to support the mission and contractual requirements.
Qualifications
+ Must be a U.S. citizen.
+ Have 4-6 years of QC Inspector experience in the grade of E-6 or civilian equivalent.
+ Must possess a working knowledge of the appropriate tools necessary to perform maintenance tasks as well as have knowledge of standardized maintenance regulations – specifically DA Pam 750-8, Functional User’s Manual for The Army Maintenance Management System (TAMMS).
+ High School Diploma or GED certificate.
+ Must comply with OSHA, EPA, Fire Regulations and published Company work rules.
+ Excellent written and oral communications skills; proficient in Microsoft Office Suite.
+ Excellent attention to detail.
+ Ability to complete and prioritize tasks on multiple concurrent projects within given timeframes.
+ Work well in a team environment and able to work with a diverse group of people.
+ Discretion and trustworthiness, due to frequent contact with confidential material.Communicate with co-workers, management, clients and all others in a courteous and professional manner.
+ Conform with and abide by all regulations, policies, work procedures, and instructions.
+ Must possess working knowledge of the Army Enterprise Systems Integration Program (AESIP), Global Combat Support System – Army (GCSS-A) application software as well as TACOM-Unique Logistics Support Applications (TULSA).
+ Must be able to pass a background security investigation as well as drug/alcohol screening prior to employment.
+ Must be able to obtain a Common Access Card (CAC) within 30 days of employment.
+ Must have operational/maintenance knowledge on a variety of military platforms to include M1 Abrams models, M109 Paladin models, M2/M3/M7 Bradley models, M88A2 Recovery Vehicle, XM1150 ABV, HMME-I, M1074/1075/1120 FOV, JLTV FOV, HEMMT FOV, HMMWV FOV as well as a variety of Ground Support Equipment and trailers.
+ Required to maintain a valid state-issued Driver’s license and applicable Government/Army license.
Desired Qualifications:
+ U.S Army Military Occupational Specialty (MOS) 91 series.Quality Inspector Certification (CQI) issued by the American Society for Quality (ASQ) or equivalent organization.Certification from the National Institute for Automotive Service Excellence (ASE) or equivalent organization.
Physical Demands:
+ Must be capable of lifting, carrying, pushing, pulling very heavy parts and loads.
+ Must be able to climb, crawl, stoop, bend, squat, and reach as required to work on equipment.
+ Be able to work outside in inclement weather conditions when necessary.
+ Wear safety items of Personal Protective Equipment (PPE) e.g. gloves, safety shoes, protective eyewear, hearing protection, and other items as appropriate.
We are an equal opportunity employer and comply with all applicable federal, state, and local fair employment practices laws. All applicants will receive consideration for employment, without regard to race, color, religion, creed, national origin, gender or gender-identity, age, marital status, sexual orientation, veteran status, disability, pregnancy or parental status, or any other basis prohibited by law. If you are an individual with a disability, or have known limitations related to pregnancy, childbirth, or related medical conditions, and would like to request a reasonable accommodation for any part of the employment process, please contact us at job-assist@akima.com or 571-353-7053 (information about job applications status is not available at this contact information).
Job: Maintenance & Repair
Travel: None
Organization: AFO - Akima Facilities Operations
Clearance: Not Applicable
Work Type: On-Site
Remote: No
ReqID: 2024-12547
Source : Akima