Maintenance Controller - Amerijet International

POSITION SUMMARY:

This position is responsible for all facets of the preventive maintenance and repair of airplanes to ensure all Amerijet aircraft meet appropriate quality standards and safety requirements and are ready for flight.

Job Responsibilities include the following, but not limited to:

• Review log pages for accuracy before the airplane leaves.
• Ensure any corrective action required by defects recorded in the aircraft log by the flight crews at out stations is corrected or deferred by licensed and qualified personnel or facility in accordance with the Amerijet GMM 7-1, GMM 4-9 and the applicable Company minimum equipment list.
• Review the qualifications of the personnel or facility assigned to accomplish unscheduled maintenance or repairs at outstations and issuing any one-time authorization that may be required in accordance with GMM 7-50.
• Ensure that unscheduled maintenance and repairs to Company aircraft are accomplished in accordance with applicable manufactures manuals or the Company's publications and the aircraft is returned to service as required by GMM 4-11, GMM 4-23 and GMM 7-1.
• Communicate with the Materials department about the requisition parts required for unscheduled aircraft maintenance and repairs.
• Ensure deferred item record keeping and distribution of paperwork are accomplished as required by the Amerijet GMM Chapter 7 Section 8.
• Communicate all pertinent information regarding defect deferral or repair procedures and requirements to the Captain of the aircraft, Maintenance personnel involved at the outstation Amerijet Flight Followers on duty.
• Provide details and specific instruction to troubleshoot and clear aircraft discrepancies.
• Provide a written "turnover report", consisting of the occurrences on the duty shift, to the incoming shift controller. This will be done every shift, even when no deferrals or outstation maintenance is accomplished.
• Provide "aircraft on ground" (AOG) information to the Manager of Maintenance Control, Director of Maintenance and Quality Control.
• Complete the Maintenance Delay I Out of Service Reports as required by the Amerijet GMM 7-36, providing a Weekly Delay Report to the Manager of Maintenance Control, the Directors of Maintenance and Quality Control.
• Advise the FAA and the Quality Control department promptly of any incidents or aircraft delays that may require FAA reporting in accordance with 14 CFR 121.705. Refer to GMM 7-5.
• Prepare the aircraft status and morning meeting reports.
• Verify part interchangeability on request from the Material department.
• Perform additional duties as assigned.

Performance Standards/Measurements:

• Become familiar with the Company policies, procedures, duties and responsibilities of the position and all subordinate maintenance staff as set forth in this General Maintenance Manual (GMM) and associated flight operations staff as set forth in the General Operations Manual.
• Promote Amerijet’s #1 value of safety as a Safety Ambassador, supporting Amerijet’s Safety Management System (SMS) components, Safety Policy, and behavioral standards.
• Identify safety concerns, issues, incidents, or hazards that should be reported and report them whenever possible and by any means necessary including Amerijet’s confidential reporting systems (Aviation Safety Action Program (ASAP) or Safety Action Report (SAR)).
• Adhere to all applicable laws, regulations (FAA, OSHA, DOT, etc.) and Company policies, procedures, and risk controls.
• Uphold Amerijet’s safety performance metric goals and understanding how they relate to their duties and responsibilities.
• Consistently follow Company policies and procedures (including governmental and safety) and departmental Standard Operating Procedures.
• Always exhibit a professional demeanor.
• Work effectively with minimal supervision.
• Proactive and timely in problem-solving.
• Maintain communication with all involved parties.
• Maintain accurate and concise records/files.
• Regular attendance and punctuality.
• Work flexible hours and be available to respond on short notice.
• Well-groomed and able to maintain a professional appearance.

Required Qualifications and Skills:

• High School Diploma or General Education Development (GED) Diploma.
• Must hold a current and valid FAA Mechanic Certificate with Airframe and Powerplant ratings.
• Must maintain Amerijet qualification and authorization for Airworthiness Release.
• Two (2) years of experience working as an aircraft maintenance technician. Preferably Boeing 767/757/777 qualified with certification and training records.
• Know ATA codes/chapters and AMM very well.
• Familiarity with accessing online aircraft manuals.
• Ability to write routine reports and correspondence.
• Ability to communicate effectively, in both oral and written communication.
• Ability to work under pressure in a team environment.
• Ability to multitask, think outside of the box and get along with others.
• Eagerness to learn and passionate about aircraft maintenance.
• Uncompromised customer and service minded problem solver.
• Highly motivated, stress resistant and result oriented.
• Willingness to work a 12-shift covering 24/7.
• Pass a five (5) years criminal record background check, and a two (2) years pre-employment drug test.
• Legally eligible to work in the country in which the position is located.

Supervisory Responsibilities:

This position will not have direct reports but may require providing training for new team members.

Language Skills:

The employee must possess good interpersonal and communications skills, be able to effectively work with others, respond to questions from managers and co-workers.

Physical Activities and Requirements of the Position:

Sedentary work; sitting most of the time. While performing the duties of this job, the employee frequently works in an office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Exerts up to 30 lbs. of force occasionally for office supplies and equipment.

While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit; stand; walk; use hands to finger, handle or feel; and reach with hands and arms; move about the facility. Some light physical effort required.

Must be able to work well under pressure. Domestic/International travel and overtime are required when necessary.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Acknowledgement:

The above statements are intended to describe the general nature of work performed in this position. These statements are not to be construed as an exhaustive list of all responsibilities, tasks, and skills required of an employee in this position. Amerijet International, Inc.reserves the right to request that other tasks be performed when warranted (for example, by emergencies, changes in personnel or workload, corporate reorganization, or technical development). Amerijet International, Inc. also reserves the right to revise this job description.

AAP/EEO Statement:

Amerijet International, Inc. is an equal opportunity and affirmative action employer and will consider all qualified applicants without regards to race, color religion, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factors under federal, state or local law. Any applicant requiring assistance with our online application process or who needs and accommodation for the application process due to a disability, should send an e-mail to ADAapps@amerijet.com .

Legal Notices to All Applicants:

EEO is the Law

Pay Transparency Non-Discrimination Provision

Employee Rights Under The Family and Medical Leave Act

Employee Polygraph Protection Act

E-verify Participation

DOJ Right to Work

Florida Law Prohibits Discrimination

Dade County Living Wage Ordinance

Revised 05/2024