Industrial Maintenance Technician at Nucycle Energy of Tampa, LLC
Tampa, FL 33566
About the Job
Industrial
Maintenance Technician
An
ADP client
is currently recruiting for an experienced individual to be our next Industrial
Maintenance Technician and join our team in our Plant City, FL 33566 location.
Who We
Are:
Nucycle
Energy of Tampa, LLC - a trailblazer in sustainable solutions, as we partner
with America's leading consumer brands to repurpose materials, diverting them
from landfills. Our mission is to provide an environmentally conscious
alternative fuel that replaces coal pound-for-pound and BTU-for-BTU in the
electrical power and cement manufacturing industries.
About
the Role:
The
Maintenance Technician is responsible for keeping a facility operating and
repairing any problems when they are discovered before they have a chance to
worsen. A Maintenance Technician will usually be required to perform a wide
range of repair tasks around a facility. Some other tasks a Maintenance
Technician may be called upon to do include.
What You
Will Do:
Core
duties and responsibilities include the following.
- Experience
with service and operation of industrial mobile equipment such as forklifts,
man lifts, and skid steer loaders. - Experience
with troubleshooting various machine systems (Electrical, Hydraulic,
Mechanical). - Perform
Preventative maintenance activities and other routine maintenance and repairs
around facility grounds. - Identify
and repair potential safety hazards. - Actively
participate and support operations functions as necessary, including but not
limited to internal equipment inspections, fire watch, cleaning of work
area(s), etc. - Performs
other related duties as assigned by supervisor or management.
Primary Responsibilities:
- Ability to read, write, and apply common sense
understanding to conduct instructions furnished in written and oral form. - Ability to use basic math operations to
complete daily tasks. - Ability to deal with high-stress situations.
- Ability to communicate well with others.
- Ability to read and interpret electrical,
hydraulic, and general assembly schematics. - Ability to don all necessary PPE and safely
work at heights, and other precarious places. - Ability to communicate effectively via radio
using two-way radio.
Our
Perfect Candidate
Education and Experience:
- High
school Diploma or equivalent. - Minimum
5 years of industrial maintenance experience. - Industrial
Technology/Industrial Maintenance/Electrical Technology Certifications preferred.
Working
Shifts: Looking to FILL the following
SHIFTS.
- Tuesday
thru Saturday from 5:15am to 1:30pm - Sunday
thru Thursday from 1:30pm to 10:00pm - Tuesday
thru Saturday from 1:30pm to 10:00pm - Sunday
thru Thursday from 5:15am to 1:30pm
Electrical
Requirements:
- Experience
working with low to medium voltages ranging from 12 to 24 VDC and 120 to 480
VAC. - Experience
troubleshooting and replacing 3-phase AC motors. - Basic
understanding and troubleshooting of motor controls including motor starters,
relays, push button stations, and thermal overload relays. - Basic
understanding of PLC operations, serial communications, ethernet
communications, field instrumentation, and I/O functions. - Ability to do common electrical distribution work
such as installing conduit, flex conduit, rigid piping, seal tight conduit, and
disconnect switches. - Experience with A/C drives (VFD, Reduced voltage
starters) would be a plus.
Mechanical
Requirements:
- Installation and
repair of a variety of power transmission devices including bearings, direct
drive gear reducers, chain drives, sprockets, and belt drives. - Experience with
repair, maintenance, and installation of material handling equipment such as
chain conveyors, belt conveyors and augers. - Installation of
electric motors and various motor couplings. - Assembly/repair of
large industrial equipment, including medium bore bearings. - Knowledge of basic
rigging/lifting techniques.
Hydraulics:
- Installation,
maintenance and troubleshooting of a variety of hydraulic pumps, motors,
accumulators, piping, and heat exchangers.
Fabrication:
- Ability to measure
and cut using oxy-acetylene torches or plasma torches. Ability to weld using, - SMAW or GMAW (Stick
or MIG).
Safety:
- Clear and
demonstrable understanding of Lock out/Tag out procedures and energy isolation. - Clear and
demonstrable understanding of Arc Flash Safety and general NFPA 70E safety
guidelines. - Understanding of and
experience with various fall protection equipment and industry standard
practices. - Familiar with the
use of Hot Work Permits, as well as fire prevention equipment (fire
extinguishers, welding blankets, and welding curtains). - Ability to clearly
understand and operate within the company’s Health and Safety Program. - Conduct housekeeping
and clean-up functions. - Work assigned
shifts, overtime as needed, day shift, mid shift, night shift, weekends, and
holidays. - Perform
additional duties as required, assigned, or instructed.
Required
Environment and Physical Abilities:
- Must be able to work
in an environment that could have elevated noise levels. - Must be able to work
in an environment with nuisance dust. - Must be able to work
in an environment with presence of industrial and vehicle operations.
Physical
Requirements:
- Must be physically
able to perform work assigned. - Access all areas
within a site which could include heights of 30+ feet, confined spaces,
climbing ladders or stairs, and common use of man lifts wearing a safety
harness. - Work will be in an
indoor manufacturing facility or periodically at a customer mineral
processing/mining site. - The employee will be
exposed to the following working conditions: Heat, noise, vibration, oils,
greases, solvents, and atmospheric conditions such as dust. - The employee will be
required to perform the following actions (from time to time): Standing,
walking, balancing, stooping, kneeling, reaching, talking, seeing, hearing, and
sitting. - Ascend and descend
stairs and stationary vertical ladders as part of normal work activity and
emergency egress situations. - Able to carry/lift/move/push
up to 50 lbs. - Close vision,
distance vision, peripheral vision, depth perception, corrected or otherwise.
Company
Offers:
- Hourly range is $30 to $35, commensurate with
experience and education. - Comprehensive benefits package available: (healthcare, vision, dental and life
insurances, paid vacation, sick days, and holidays).
To Apply:
Please
submit your resume
via the
‘Apply Now’ button!
We are an Equal Opportunity Employer!