Hiring A Controls Engineer In Orlando, FL For an Amusement Park - PostJobMatches
Orlando, FL 32805
About the Job
PostJobMatches By WorkStaff USA is a leading staffing agency in the job placement industry, providing top-notch professionals to facilities across the country. Our team of experienced recruiters work together to match the best candidates with the right job opportunities.
Today we are hiring a Controls Engineer for our client In Orlando, FL For their Amusement Park. The must have Skills: DCS/PLC Programming, Control Panel Design, Instrumentation, Ethernet-based control systems, safety systems, DeltaV, Experion, 800xA., Allen Bradley, Modicon, Siemens, and AutoCAD
Experience level:
Mid-senior
Experience required:
5 Years
Education level:
Bachelors degree
Job function:
Engineering
Industry:
Industrial Automation
Compensation:
$121,000 - $150,000
Total position:
1
Relocation assistance:
Limited assistance
Visa sponsorship eligibility:
No
JOB DESCRIPTION:
We have a Controls Engineer position open in Orlando, FL.
This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance.
RESPONSIBILITIES:
Must be organized, technically competent, have effective oral and written communications, and experience in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters.
Designs, develops, and implements DCS/PLC control system (logic software and hardware) to meet process requirements. As well as complying with any local or government agency design/implementation codes.
Knowledge of control panel and system design standards and code practices for any local or government agencies
Develops documents detailing control configuration and design. Documents include Theory/Description of operation, Detailed control system design description, system implementation/acceptance test plans.
Able to interface with facility design to optimize panel location minimizing voltage drop and optimizing panel maintenance.
Able to perform the following system design calculations/analysis: Short circuit protection, harmonics, noise reduction/cancellation, power consumption, load flow, short circuit protection, protective relay/circuit design, ground fault monitoring, safety system implementation (SIL rating)
Knowledge of analyzing system design for Hazard analysis development and mitigation
Ability to implement control system redundancy to minimize single points of failure.
Develops schematics of control system configuration, wiring, network layout, and equipment panel layouts on AutoCAD
Will assist with the initial start-up and debugging of integrated systems and the development of system documentation.
Individual will be working on automation and control system integration projects for clients in industries such as entertainment and manufacturing.
Will act as technical lead on projects and guide lower-level engineers, technicians, and contractors.
Will act as Project Manager on smaller projects ranging from $50k to $250k. This includes but is not limited to:
Develops and executes implementation plans for the project.
Assigns work to meet overall project deadlines.
Ensures that all project team members clearly understand the scope of W-M responsibilities.
Develops schedules for W-M and customer requirements.
Evaluates progress on project(s) and details changes.
Responsible for all purchasing and subcontractor requirements
Responsible for the development of costs and proposal of change orders to contract scope.
QUALIFICATIONS:
Education Bachelors Degree in Electrical Engineering. (Directly related experience may be substituted for degree)
5+ years in the following areas is preferred: Ethernet-based control systems, safety systems, instrumentation, components, logic programming, and DCS programming (i.e., DeltaV, Experion, 800xA.)
Experience with instrumentation and controls/PLC system design (i.e., Allen Bradley, Modicon, Siemens) required.
Experience with AutoCAD is also desired.
Key Competencies Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving
Skills All employees are required to be proficient in the use of Microsoft Windows and Office environments.
TRAVEL: Ability to travel up to 35%.
PHYSICAL DEMANDS OF POSITION:
Seeing, color perception, hearing, listening, clear speech, dexterity in hands, driving, lifting, climbing, ability to mount and dismount equipment, pushing, and pulling.
WORKING CONDITIONS:
Standard office environment, On-site office environment, and diverse industrial environments. Frequent PC usage, fax machines, copy machines, and phones.
As a 100% Employee-Owned Company our people are passionate about solving your unique engineering challenges, and with the support of industry experts behind them, they can successfully execute projects of any size while meeting your requirements of scope, schedule, and budget.
This company has been providing customers with engineering, system integration and fabrication solutions for more than 40 years. With offices throughout the US and over 500 professionals on our staff, we are one of the largest and most well-established engineering companies in the United States, and we've successfully finished numerous projects for our US clients in many parts of the world. We're confident that our qualified staff has the knowledge, experience, and talent to create and deliver the solutions you need for your facility process and operation needs.
This company also ranks on Inc. 5000's Fastest-Growing Private Companies list and is a GSA Schedule holder with the Federal Government for professional engineering services and manufacturing.
Employment Type: Full-Time
Salary: $ 121,000.00 150,000.00 Per Year
Today we are hiring a Controls Engineer for our client In Orlando, FL For their Amusement Park. The must have Skills: DCS/PLC Programming, Control Panel Design, Instrumentation, Ethernet-based control systems, safety systems, DeltaV, Experion, 800xA., Allen Bradley, Modicon, Siemens, and AutoCAD
Experience level:
Mid-senior
Experience required:
5 Years
Education level:
Bachelors degree
Job function:
Engineering
Industry:
Industrial Automation
Compensation:
$121,000 - $150,000
Total position:
1
Relocation assistance:
Limited assistance
Visa sponsorship eligibility:
No
JOB DESCRIPTION:
We have a Controls Engineer position open in Orlando, FL.
This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance.
RESPONSIBILITIES:
Must be organized, technically competent, have effective oral and written communications, and experience in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters.
Designs, develops, and implements DCS/PLC control system (logic software and hardware) to meet process requirements. As well as complying with any local or government agency design/implementation codes.
Knowledge of control panel and system design standards and code practices for any local or government agencies
Develops documents detailing control configuration and design. Documents include Theory/Description of operation, Detailed control system design description, system implementation/acceptance test plans.
Able to interface with facility design to optimize panel location minimizing voltage drop and optimizing panel maintenance.
Able to perform the following system design calculations/analysis: Short circuit protection, harmonics, noise reduction/cancellation, power consumption, load flow, short circuit protection, protective relay/circuit design, ground fault monitoring, safety system implementation (SIL rating)
Knowledge of analyzing system design for Hazard analysis development and mitigation
Ability to implement control system redundancy to minimize single points of failure.
Develops schematics of control system configuration, wiring, network layout, and equipment panel layouts on AutoCAD
Will assist with the initial start-up and debugging of integrated systems and the development of system documentation.
Individual will be working on automation and control system integration projects for clients in industries such as entertainment and manufacturing.
Will act as technical lead on projects and guide lower-level engineers, technicians, and contractors.
Will act as Project Manager on smaller projects ranging from $50k to $250k. This includes but is not limited to:
Develops and executes implementation plans for the project.
Assigns work to meet overall project deadlines.
Ensures that all project team members clearly understand the scope of W-M responsibilities.
Develops schedules for W-M and customer requirements.
Evaluates progress on project(s) and details changes.
Responsible for all purchasing and subcontractor requirements
Responsible for the development of costs and proposal of change orders to contract scope.
QUALIFICATIONS:
Education Bachelors Degree in Electrical Engineering. (Directly related experience may be substituted for degree)
5+ years in the following areas is preferred: Ethernet-based control systems, safety systems, instrumentation, components, logic programming, and DCS programming (i.e., DeltaV, Experion, 800xA.)
Experience with instrumentation and controls/PLC system design (i.e., Allen Bradley, Modicon, Siemens) required.
Experience with AutoCAD is also desired.
Key Competencies Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving
Skills All employees are required to be proficient in the use of Microsoft Windows and Office environments.
TRAVEL: Ability to travel up to 35%.
PHYSICAL DEMANDS OF POSITION:
Seeing, color perception, hearing, listening, clear speech, dexterity in hands, driving, lifting, climbing, ability to mount and dismount equipment, pushing, and pulling.
WORKING CONDITIONS:
Standard office environment, On-site office environment, and diverse industrial environments. Frequent PC usage, fax machines, copy machines, and phones.
As a 100% Employee-Owned Company our people are passionate about solving your unique engineering challenges, and with the support of industry experts behind them, they can successfully execute projects of any size while meeting your requirements of scope, schedule, and budget.
This company has been providing customers with engineering, system integration and fabrication solutions for more than 40 years. With offices throughout the US and over 500 professionals on our staff, we are one of the largest and most well-established engineering companies in the United States, and we've successfully finished numerous projects for our US clients in many parts of the world. We're confident that our qualified staff has the knowledge, experience, and talent to create and deliver the solutions you need for your facility process and operation needs.
This company also ranks on Inc. 5000's Fastest-Growing Private Companies list and is a GSA Schedule holder with the Federal Government for professional engineering services and manufacturing.
Employment Type: Full-Time
Salary: $ 121,000.00 150,000.00 Per Year
Source : PostJobMatches