Heavy Equipment Operator - Excavator, Dozer, Loader at MasTec Inc.

Overview MasTec Civil is currently hiring for Heavy Equipment Operators to join our team! A MasTec Civil Equipment Operator is a non-FSLA exempt, skilled craft position that performs on heavy construction projects within any combination of the duties described more fully below. An Operator typically performs a wide variety of tasks, transferring from one task to another as the workflow dictates. To perform this job successfully, an individual must be able to operate heavy construction equipment commonly utilized in the heavy highway industry such as but not limited to backhoes, excavators, bulldozers and loaders, and perform each position responsibly, satisfactorily and be physically fit to perform these duties pursuant to the Safety Sensitive Position requirements within the acknowledged work environment. The requirements listed below are representative of the knowledge, skill, and/or ability required to operate all or a specific piece of equipment depending on the context. Company Overview Founded in 1987, MasTec Civil, LLC (formerly known as Condotte America) is a heavy highway contractor specializing in the construction of complex transportation projects that include roadway, bridges, interchanges, mass transit, and tolling facilities. In short, we build the roads and bridges that connect our families, our communities, and our nation. In doing so, client satisfaction is of primary importance to us and our record reflects our emphasis on understanding our client needs in order to exceed their expectations. Responsibilities Must be able to demonstrate proficiency in handling, pre-start inspections, post-start inspections, maneuvering skills, shut down and securing procedures. Must be able to work various shifts in a team environment.? Team activities include responsibility and accountability for the day-to-day function of the team as well as with senior management who are involved running the project. Must perform daily safety and operational inspection of the equipment. Inspections will be performed per documented checklist, determine if any parts are malfunctioning, report any deficiencies, and perform minor repairs to the equipment as needed. Must properly communicate to the Supervisor and Fleet Department any damages or mechanical breakdowns. Must ensure that regular maintenance of the assigned equipment is being scheduled and performed as required by the equipment operations and maintenance manual. Must possess a thorough understanding of the equipment operation characteristics, controls, capacity limitations, emergency skills, response to fire, power line contact, tipping, malfunction characteristics and performance questions about the specific types of equipment in use. The Operator will be responsible for all safety aspects of operating the equipment. The Operator must be able to climb on and off heavy mobile equipment safely. Must be willing to assist in other duties as required while not operating the equipment. The Operator Position is a Safety Sensitive Position, subject to the requirements of this safety designation. The Operator position requires the ability to lift and carry, on a frequent basis, at least 50-80 pounds personally, and up to 150 pounds with assistance. Loading different materials into the bucket by hand if needed. Is expected from the operator to have experience placing and removing TBW construction concrete barriers as needed; in an efficient and productive manner; loading and unloading from and into a truck. The Operator position always requires the ability to communicate effectively. The Operator position requires the Situation Awareness and constant alertness to the multiple concurrent activities of the construction site, including the activities of other employees and contractors, the operation of stationary equipment, and the movement of mobile equipment. Must be able to maintain a level grade while spreading and balancing material or while recovering spoil material or loading from a stockpile of materials. Must understand the industry terms and language for graded stakes as applicable to a graded stake by surveyor. Must be able to load trucks up to but not limited to 20 trucks at the time assigned to a stockpile loading as needed. Must be experienced in the changing of the different attachments pertaining to the equipment including but not limited to forks and boom to lifts materials or hydraulic hammer for demolition activities. Must have a knowledge of the maximum capacities of the equipment. It is desired that the operator has at least knowledge of electronics grade laser. Must understand terms like cut and fills while excavating according to survey stakes. Must be aware of all utility location surrounding the work area prior to commence work. Must request a log or visible location of utility prior to start any excavation. Must request and lead a ground man, if necessary, to assist in location of utilities, and grade checking Must ensure that all employees assisting or working near or around the equipment remain outside of the maximum reach of the maximum reach of any part or extension of the equipment. Must stop the machine an apply secure pins before abandon equipment. Must be able to load trucks as needed. Must have the safety awareness to maintain the equipment shut down and key removed in occasions where the equipment is being washed or maintenance is being performed on it. Qualifications Construction related experience (roads, highways, bridges, etc.), minimum 1-year experience for Loader or Backhoe, minimum of 3-year for Excavator or Bulldozer or 5-year experience in roadway finishing work. Have required documentation evidencing competency or certifications as required by the industry standards and/or governmental agencies. Completion of High School or secondary education is preferred Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.

Construction related experience (roads, highways, bridges, etc.), minimum 1-year experience for Loader or Backhoe, minimum of 3-year for Excavator or Bulldozer or 5-year experience in roadway finishing work. Have required documentation evidencing competency or certifications as required by the industry standards and/or governmental agencies. Completion of High School or secondary education is preferred Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.

Must be able to demonstrate proficiency in handling, pre-start inspections, post-start inspections, maneuvering skills, shut down and securing procedures. Must be able to work various shifts in a team environment.? Team activities include responsibility and accountability for the day-to-day function of the team as well as with senior management who are involved running the project. Must perform daily safety and operational inspection of the equipment. Inspections will be performed per documented checklist, determine if any parts are malfunctioning, report any deficiencies, and perform minor repairs to the equipment as needed. Must properly communicate to the Supervisor and Fleet Department any damages or mechanical breakdowns. Must ensure that regular maintenance of the assigned equipment is being scheduled and performed as required by the equipment operations and maintenance manual. Must possess a thorough understanding of the equipment operation characteristics, controls, capacity limitations, emergency skills, response to fire, power line contact, tipping, malfunction characteristics and performance questions about the specific types of equipment in use. The Operator will be responsible for all safety aspects of operating the equipment. The Operator must be able to climb on and off heavy mobile equipment safely. Must be willing to assist in other duties as required while not operating the equipment. The Operator Position is a Safety Sensitive Position, subject to the requirements of this safety designation. The Operator position requires the ability to lift and carry, on a frequent basis, at least 50-80 pounds personally, and up to 150 pounds with assistance. Loading different materials into the bucket by hand if needed. Is expected from the operator to have experience placing and removing TBW construction concrete barriers as needed; in an efficient and productive manner; loading and unloading from and into a truck. The Operator position always requires the ability to communicate effectively. The Operator position requires the Situation Awareness and constant alertness to the multiple concurrent activities of the construction site, including the activities of other employees and contractors, the operation of stationary equipment, and the movement of mobile equipment. Must be able to maintain a level grade while spreading and balancing material or while recovering spoil material or loading from a stockpile of materials. Must understand the industry terms and language for graded stakes as applicable to a graded stake by surveyor. Must be able to load trucks up to but not limited to 20 trucks at the time assigned to a stockpile loading as needed. Must be experienced in the changing of the different attachments pertaining to the equipment including but not limited to forks and boom to lifts materials or hydraulic hammer for demolition activities. Must have a knowledge of the maximum capacities of the equipment. It is desired that the operator has at least knowledge of electronics grade laser. Must understand terms like cut and fills while excavating according to survey stakes. Must be aware of all utility location surrounding the work area prior to commence work. Must request a log or visible location of utility prior to start any excavation. Must request and lead a ground man, if necessary, to assist in location of utilities, and grade checking Must ensure that all employees assisting or working near or around the equipment remain outside of the maximum reach of the maximum reach of any part or extension of the equipment. Must stop the machine an apply secure pins before abandon equipment. Must be able to load trucks as needed. Must have the safety awareness to maintain the equipment shut down and key removed in occasions where the equipment is being washed or maintenance is being performed on it.