Electrical Engineer from INSPYR Solutions
Salisbury, NC 28146
About the Job
Title: Industrial Electrician
Location: Salisbury, NC
Duration: Full time
Compensation: $30 per hour
Work Requirements: US Citizen, GC Holders or Authorized to Work in the U.S.
Industrial Electrician
Job Description:
Under general supervision, performs Electrical Engineer duties. Works with a high degree of independence and skill from knowledge and ability acquired through experience and technical training on corrective actions and procedures in repairing and installing equipment and utilities. Must perform specific responsibilities as instructed or requested by supervision. Must meet specific performance standards to complete assigned tasks.
Essential Duties and Responsibilities: include the following. Other duties may be assigned.
Keep work area, tools and equipment clean and orderly.
Work with other craftsmen, as required to coordinate the moving, changing, or placing of materials, parts, and supplies used in installing, repairing, or servicing equipment and utilities.
Maintain filters and keep necessary maintenance records.
Perform routine maintenance on gas, diesel, and electric industrial trucks.
Check equipment for worn or defective parts and determine if equipment is in top operating condition, and corrects by repairing or replacing if necessary.
Keep record of all piping and equipment relocation.
Work with manufacturer's representative on new installations and equipment problems.
Align equipment such as pumps, motors, controls, and gear drives.
Change mill and caster rolls as requested and readies equipment for start-up by production.
Keep records on gas, oil, and water meters.
Assembly and maintain all bearings.
Maintain and repairs hydraulic and pneumatic systems.
Use and care for hand and power tools in accordance with safety and good operating practices.
Perform other maintenance duties as assigned or requested.
Performance Standards:
a). Perform assigned Maintenance Mechanic duties according to Maintenance Department practices. Due to the wide range of responsibilities for this position, the department supervisor or Superintendent will make judgment decisions based on their knowledge of tasks needing to be performed.
b). Ensure daily tasks are completed in time allotted.
c). Ensure daily tasks are performed in compliance with established practices.
d). Ensure safety rules are followed.
e). Follow established guidelines in relation to attendance, breaks, on call responsibilities, and company policy.
f). Report machinery, safety or personnel issues to supervisor.
g). Determine nature of machinery malfunction or breakdown. Advise supervisor to arrange repairs as necessary.
h). Recognize safety hazards or unsafe activities of other personnel. Report such to offending associate and supervisor for review during scheduled safety talk.
i). Recognize misuse, theft or damage of company property and report such to supervisor.
j). Support and participate in open communication between supervision and fellow employees.
k). Secure necessary supplies to perform assigned duties.
Maintenance Tech
Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience:
High school diploma or general education degree (GED) is required. Certificate from a secondary technical or vocational school; or three to six months of related experience and/or training; or equivalent combination of education and experience.
Language Skills:
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
Computer and other Skills:
Ability to acquire basic computer skills to enter and extract information from computer. Ability to use measuring equipment such as micrometer and tape.
Technical Skills:
Working knowledge of lubricants and their proper uses in filters, oil reservoirs and grease fittings. Ability to learn alignment procedures for various types of equipment. Understand and able to apply knowledge of hydraulic and pneumatic systems.
Mathematical Skills:
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to interpret graphic representations.
Reasoning Ability:
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Working knowledge of problem solving skills and ability to apply them in a reasonable manner.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this Job, the employee is regularly required to stand; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee is frequently required to walk; use hands to finger, handle, or feel; climb or balance and talk or hear. The employee must regularly lift and /or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions, moving mechanical parts and vibration. The employee is frequently exposed to fumes or airborne particles and high heat.
Personal Protective Equipment: Personal protective equipment includes but is not limited to safety glasses, steel-toed footwear, and hearing protection as required.
About INSPYR Solutions
As a leading technology solutions company, we connect top IT talent with clients to provide innovative business solutions through our IT Staffing, Professional Services, and Infrastructure Solutions divisions. There are four elements that set us apart and serve as pillars of our company philosophy: Quality, Expertise, People, and Relationships. By always striving for excellence in these areas and focusing on the human aspect of our business, we work seamlessly together with our talent and clients to match the right solutions to the right opportunities. Learn more about us at inspyrsolutions.com.
INSPYR Solutions provides Equal Employment Opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, INSPYR Solutions complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.
#LI-EL1
Location: Salisbury, NC
Duration: Full time
Compensation: $30 per hour
Work Requirements: US Citizen, GC Holders or Authorized to Work in the U.S.
Industrial Electrician
Job Description:
Under general supervision, performs Electrical Engineer duties. Works with a high degree of independence and skill from knowledge and ability acquired through experience and technical training on corrective actions and procedures in repairing and installing equipment and utilities. Must perform specific responsibilities as instructed or requested by supervision. Must meet specific performance standards to complete assigned tasks.
Essential Duties and Responsibilities: include the following. Other duties may be assigned.
Keep work area, tools and equipment clean and orderly.
Work with other craftsmen, as required to coordinate the moving, changing, or placing of materials, parts, and supplies used in installing, repairing, or servicing equipment and utilities.
Maintain filters and keep necessary maintenance records.
Perform routine maintenance on gas, diesel, and electric industrial trucks.
Check equipment for worn or defective parts and determine if equipment is in top operating condition, and corrects by repairing or replacing if necessary.
Keep record of all piping and equipment relocation.
Work with manufacturer's representative on new installations and equipment problems.
Align equipment such as pumps, motors, controls, and gear drives.
Change mill and caster rolls as requested and readies equipment for start-up by production.
Keep records on gas, oil, and water meters.
Assembly and maintain all bearings.
Maintain and repairs hydraulic and pneumatic systems.
Use and care for hand and power tools in accordance with safety and good operating practices.
Perform other maintenance duties as assigned or requested.
Performance Standards:
a). Perform assigned Maintenance Mechanic duties according to Maintenance Department practices. Due to the wide range of responsibilities for this position, the department supervisor or Superintendent will make judgment decisions based on their knowledge of tasks needing to be performed.
b). Ensure daily tasks are completed in time allotted.
c). Ensure daily tasks are performed in compliance with established practices.
d). Ensure safety rules are followed.
e). Follow established guidelines in relation to attendance, breaks, on call responsibilities, and company policy.
f). Report machinery, safety or personnel issues to supervisor.
g). Determine nature of machinery malfunction or breakdown. Advise supervisor to arrange repairs as necessary.
h). Recognize safety hazards or unsafe activities of other personnel. Report such to offending associate and supervisor for review during scheduled safety talk.
i). Recognize misuse, theft or damage of company property and report such to supervisor.
j). Support and participate in open communication between supervision and fellow employees.
k). Secure necessary supplies to perform assigned duties.
Maintenance Tech
Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience:
High school diploma or general education degree (GED) is required. Certificate from a secondary technical or vocational school; or three to six months of related experience and/or training; or equivalent combination of education and experience.
Language Skills:
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
Computer and other Skills:
Ability to acquire basic computer skills to enter and extract information from computer. Ability to use measuring equipment such as micrometer and tape.
Technical Skills:
Working knowledge of lubricants and their proper uses in filters, oil reservoirs and grease fittings. Ability to learn alignment procedures for various types of equipment. Understand and able to apply knowledge of hydraulic and pneumatic systems.
Mathematical Skills:
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to interpret graphic representations.
Reasoning Ability:
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Working knowledge of problem solving skills and ability to apply them in a reasonable manner.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this Job, the employee is regularly required to stand; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee is frequently required to walk; use hands to finger, handle, or feel; climb or balance and talk or hear. The employee must regularly lift and /or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions, moving mechanical parts and vibration. The employee is frequently exposed to fumes or airborne particles and high heat.
Personal Protective Equipment: Personal protective equipment includes but is not limited to safety glasses, steel-toed footwear, and hearing protection as required.
About INSPYR Solutions
As a leading technology solutions company, we connect top IT talent with clients to provide innovative business solutions through our IT Staffing, Professional Services, and Infrastructure Solutions divisions. There are four elements that set us apart and serve as pillars of our company philosophy: Quality, Expertise, People, and Relationships. By always striving for excellence in these areas and focusing on the human aspect of our business, we work seamlessly together with our talent and clients to match the right solutions to the right opportunities. Learn more about us at inspyrsolutions.com.
INSPYR Solutions provides Equal Employment Opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, INSPYR Solutions complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.
#LI-EL1
Salary
30 - 35 /hour