Bridge Inspection Engineer Graduate - Clark Nexsen

A Bridge Inspection Engineer Graduate will be responsible for assisting in various aspects of a bridge safety inspection project while working under the close supervision and guidance of a licensed bridge engineer. Typical responsibilities include assisting in field inspections to include bridge safety inspections and structural condition assessments and preparing bridge safety inspection reports. May be required to perform bridge safety inspection team leader duties as assigned which include the planning and organization of a bridge safety inspection or a group of bridge safety inspections, the performance and completion of said inspections, the coordination and field liaison of various access equipment and maintenance of traffic providers as well as the owner/agency as appropriate, and the completion of the bridge safety inspection report.

General responsibilities include but are not limited to the following:

• Serving as an Assistant or Inspection Team Leader for NBI bridge safety inspections
• Writing bridge safety inspection reports or reviewing inspection reports written by other engineers/inspectors
• Supervising and directing the work of inspectors and CADD technicians as appropriate
• Perform or assist in the development and calculation of bridge live load ratings
• Office and field coordination with vendors, subconsultants, and owners/agencies as appropriate
• Preparation of marketing and presentation materials as directed
• Obtain guidance from Senior Bridge Engineers and the Department Head as necessary to resolve technical and coordination issues and conflicting criteria
• Complying with the company’s quality control practices and procedures
• Working with, responding to, and taking direction from the Managing Principals, Project Managers, Operations Directors, and senior management
• Participate in team meetings and coordinating efforts with other team members
• Mentoring and monitoring the professional development of junior bridge inspection staff

Project responsibilities include but are not limited to the following:

• Perform bridge safety inspection tasks as directed
• Serve in the role of Bridge Inspection Team Leader on projects as assigned
• Preparing or assisting in preparation of scope and fee proposals for bridge safety inspection projects
• Preparing accurate and complete bridge safety inspection reports for project submittals
• Reviewing calculations and all work products produced by inspectors assigned to the project as appropriate
• Reviewing all work products produced by support staff assigned to the project
• Coordinate work product with other disciplines, as appropriate
• Adhere to project, department, and corporate QA/QC procedures as appropriate
• Adhere to project budget and schedule

Education, Technology, and Experience

• Graduate of an ABET-accredited college or university in one of the following disciplines: Civil Engineering (structural emphasis), Civil and Environmental Engineering (structural emphasis), or Civil Engineering Technology (structural emphasis).
• Successful completion of NHI Course #130055 Safety Inspection of In-Service Bridges is desirable
• Completed or be in a position to complete the Fundamentals of Engineering Exam and all other state requirements for certification as an EI/EIT within 24 months after being hired
• Ability to complete all requirements for PE licensure within 72 months after being hired is preferred
• Active membership in NSPE, ASCE, ASHE, or other related professional organizations is desirable
• Minimum of two (2) years of bridge inspection experience is desirable
• Knowledge and familiarity of the National Bridge Inspection Standards, AASHTO Manual for Bridge Evaluation, and the Bridge Inspector’s Reference Manual
• Prior experience in the design and/or construction of bridges is desirable
• Prior experience on VDOT and/or Federal bridge inspection projects is desirable
• Successful completion of NHI Course #130053 Bridge Inspection Refresher Training, #130078 Fracture Critical Inspection Techniques for Steel Bridges, and/or #130087 Inspection and Maintenance of Ancillary Highway Structures is desirable

Essential Abilities

• Travel an average of 50% of the time
• Work may involve times outside normal working hours and on weekends
• Work outdoors with varying terrain and all types of weather
• Stand, walk, and climb for 8+ hours a day
• Be able to lift 50-60 lbs and operate bridge safety inspection equipment
• Be able to work at heights, over water, and in confined spaces

Additional Knowledge, Skills and Abilities 

• A Bridge Inspection Engineer Graduate should be able to effectively utilize current company software programs for word processing, e-mail, accounting, and information management.
• Working familiarity with analysis, design, and production software including but not limited to Microsoft Excel and Access, AASHTOWareBrR, and Microstation, to a point of being able to understand the capabilities and limitations of the programs and interact with the support staff in their use of the software is highly desirable.
• Ability to prepare effective and concise documents and correspondence.
• Ability to make presentations to a variety of groups
• Have a can-do attitude with a desire to provide outstanding professional services
• Be dedicated to his or her professional development as well as the success of colleagues and the firm as a whole
• Be dedicated to the advancement of the engineering profession

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c) Professionals