Brake Roll Operator II 2nd Shift at JobsRUs.com
Mayville, WI
About the Job
JobsRUs.com. is seeking to hire a Brake Roll Operator for our client in Mayville, WI!
Pay $20.59/Hour
2ND Shift Base pay rate $20.09/HR + $.50 Shift Differential
2ND Shift: MONDAY-THURSDAY 2:30PM 1AM with mandatory OT that can extend the M-F work hours up to 10 hours and also requires every other Saturday as needed to meet production needs.
JOB SUMMARY:
Perform production work on a variety of press brakes loading and unloading parts and basic inspection to ensure quality of the parts. Will not be responsible for machine set up or tear down. Will have the opportunity to acquire the skills necessary to advance to Brake/Roll Operator #2 classification.
ESSENTIAL FUNCTIONS:
Responsible for the quality of the parts produced.
Follow all rules regarding machine operation and machine guarding.
Maintain simple reports on productivity, quality and safety.
QUALIFICATIONS:
Physically able to do work requiring frequent standing, bending, lifting, pushing and pulling. Must be able to lift and carry, push and pull 30 lbs.
Sufficient reading and writing ability to follow work order instructions and prepare simple production reports.
Sufficient visual acuity (corrected) to read instructions, operate machines and inspect parts.
Sufficient manual dexterity to operate the equipment properly.
Punch Press and Brake Department Required Tooling List
Allen Wrench
Machinist Square, (12 or 24 inch)
Tape measure, 912Ft)
Calipers, 8-inch minimum (Dial or Digital)
Center Punch
Scriber
Ball Peen Hammer
15/16-inch Combination Wrench, (Punch Press only)
Protractor, (Press Brake only)
Tool Box for the above tools.
**these would have to be obtained in a short time after hire if they did not have.
Pay $20.59/Hour
2ND Shift Base pay rate $20.09/HR + $.50 Shift Differential
2ND Shift: MONDAY-THURSDAY 2:30PM 1AM with mandatory OT that can extend the M-F work hours up to 10 hours and also requires every other Saturday as needed to meet production needs.
JOB SUMMARY:
Perform production work on a variety of press brakes loading and unloading parts and basic inspection to ensure quality of the parts. Will not be responsible for machine set up or tear down. Will have the opportunity to acquire the skills necessary to advance to Brake/Roll Operator #2 classification.
ESSENTIAL FUNCTIONS:
Responsible for the quality of the parts produced.
Follow all rules regarding machine operation and machine guarding.
Maintain simple reports on productivity, quality and safety.
QUALIFICATIONS:
Physically able to do work requiring frequent standing, bending, lifting, pushing and pulling. Must be able to lift and carry, push and pull 30 lbs.
Sufficient reading and writing ability to follow work order instructions and prepare simple production reports.
Sufficient visual acuity (corrected) to read instructions, operate machines and inspect parts.
Sufficient manual dexterity to operate the equipment properly.
Punch Press and Brake Department Required Tooling List
Allen Wrench
Machinist Square, (12 or 24 inch)
Tape measure, 912Ft)
Calipers, 8-inch minimum (Dial or Digital)
Center Punch
Scriber
Ball Peen Hammer
15/16-inch Combination Wrench, (Punch Press only)
Protractor, (Press Brake only)
Tool Box for the above tools.
**these would have to be obtained in a short time after hire if they did not have.