Aircraft Inspector NDT Level 2 - AAR
OKLAHOMA CITY, OK
About the Job
Title: Aircraft Inspector NDT Level 2
Location: United States-Oklahoma-Oklahoma City
Job Number: 15492
AAR is the place of choice to build an inspiring career.
AAR Services, repairs, and overhauls aircraft and aircraft engines to ensure airworthiness by performing the following duties. This roles duties includes the following to support our goals and objectives;
ESSENTIAL DUTIES AND RESPONSIBILITIES
+ Process daily incoming and outgoing material to meet
+ Quality Control requirements as stated in the AAR ISO 9000 Procedures Manual and Customer Requirements Manual.
+ Assist the Director of Quality Control in reviewing and updating department standards.
+ Interface with suppliers / product line to disposition rejects.
+ Perform NDT inspections in compliance with customer work instructions, and AAR procedures and policies.
+ Record all inspection functions on applicable paperwork in accordance with the customer policies and procedures.
+ Responsible for Non-Destructive Testing (NDT) of Aircraft and Components.
+ Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the NDT method(s) as used by the employer.
+ Shall be capable of assuming technical responsibility for the NDT facility and staff.
+ Be capable of selecting the method and technique for a specific inspection.
+ Be capable of preparing and verifying the adequacy of procedures and work instructions.
+ Approve NDT procedures and work instructions for technical adequacy.
+ Have a general knowledge of other NDT methods, product manufacturing, and inspection technologies used by the employer.
+ When specified in the written practice, have a basic knowledge of aircraft or vehicle maintenance.
+ Be capable of providing or directing training, examination, and certification of personnel.
+ Conduct NDT for the acceptance of parts and document the results if a demonstration of proficiency in this ability was included in the practical examination.
+ When specified in the written practice, be capable of auditing outside agencies to ensure the requirements of the written practice are met.
+ All other duties as assigned.
CORE COMPETENCIES
+ Commitment to company values and ethics
+ Dependability: personally responsible, completes work in a timely manner, and performs tasks accurately
+ Motivation: must maintain a positive attitude and strong work energy
+ Organization: very detail oriented and always comes prepared
+ Communication: excellent interpersonal and oral and written communication skills Initiative: plans work and carries out tasks without detailed instructions, prepares for problems or opportunities in advance, undertakes additional responsibilities
+ Strong judgment and decision making
+ Analytical skills: must be able to gather information and use data to determine cause and effect for complex problem solving
Qualifications:
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
MINIMUM REQUIREMENTS FOR THE JOB:
+ Level II certification for one or more applicable Non-destructive Testing (NDT) disciplines, such as ultrasonic, eddy current.
+ Ability to correctly use one or more types of applicable NDT equipment.
+ 3-4 years experience in aircraft Non-destructive Testing (NDT).
+ Familiar with aircraft manufacturers technical documentation.
+ Ability to read and interpret ADs, S/Bs, SRMs, industry NDT specifications and other work instructions.
+ Familiar with regulatory requirements of FAR 145 repair station.
+ FAA Airframe and Powerplant (A&P) License highly preferred.
EDUCATION and/or EXPERIENCE
+ Associates degree (A.A.) or equivalent from 2-year college or technical school; or 4-years related experience and/or training; or
+ equivalent combination of education and experience.
PHYSICAL DEMANDS/WORK ENVIRONMENT
The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility. The environmental characteristic for this position is a warehouse setting. Candidates should be able to adapt to a traditional warehouse environment. Must be able to lift and carry up to 75 pounds and comply with OSHA standards
#LI-DT1
We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
Location: United States-Oklahoma-Oklahoma City
Job Number: 15492
AAR is the place of choice to build an inspiring career.
AAR Services, repairs, and overhauls aircraft and aircraft engines to ensure airworthiness by performing the following duties. This roles duties includes the following to support our goals and objectives;
ESSENTIAL DUTIES AND RESPONSIBILITIES
+ Process daily incoming and outgoing material to meet
+ Quality Control requirements as stated in the AAR ISO 9000 Procedures Manual and Customer Requirements Manual.
+ Assist the Director of Quality Control in reviewing and updating department standards.
+ Interface with suppliers / product line to disposition rejects.
+ Perform NDT inspections in compliance with customer work instructions, and AAR procedures and policies.
+ Record all inspection functions on applicable paperwork in accordance with the customer policies and procedures.
+ Responsible for Non-Destructive Testing (NDT) of Aircraft and Components.
+ Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the NDT method(s) as used by the employer.
+ Shall be capable of assuming technical responsibility for the NDT facility and staff.
+ Be capable of selecting the method and technique for a specific inspection.
+ Be capable of preparing and verifying the adequacy of procedures and work instructions.
+ Approve NDT procedures and work instructions for technical adequacy.
+ Have a general knowledge of other NDT methods, product manufacturing, and inspection technologies used by the employer.
+ When specified in the written practice, have a basic knowledge of aircraft or vehicle maintenance.
+ Be capable of providing or directing training, examination, and certification of personnel.
+ Conduct NDT for the acceptance of parts and document the results if a demonstration of proficiency in this ability was included in the practical examination.
+ When specified in the written practice, be capable of auditing outside agencies to ensure the requirements of the written practice are met.
+ All other duties as assigned.
CORE COMPETENCIES
+ Commitment to company values and ethics
+ Dependability: personally responsible, completes work in a timely manner, and performs tasks accurately
+ Motivation: must maintain a positive attitude and strong work energy
+ Organization: very detail oriented and always comes prepared
+ Communication: excellent interpersonal and oral and written communication skills Initiative: plans work and carries out tasks without detailed instructions, prepares for problems or opportunities in advance, undertakes additional responsibilities
+ Strong judgment and decision making
+ Analytical skills: must be able to gather information and use data to determine cause and effect for complex problem solving
Qualifications:
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
MINIMUM REQUIREMENTS FOR THE JOB:
+ Level II certification for one or more applicable Non-destructive Testing (NDT) disciplines, such as ultrasonic, eddy current.
+ Ability to correctly use one or more types of applicable NDT equipment.
+ 3-4 years experience in aircraft Non-destructive Testing (NDT).
+ Familiar with aircraft manufacturers technical documentation.
+ Ability to read and interpret ADs, S/Bs, SRMs, industry NDT specifications and other work instructions.
+ Familiar with regulatory requirements of FAR 145 repair station.
+ FAA Airframe and Powerplant (A&P) License highly preferred.
EDUCATION and/or EXPERIENCE
+ Associates degree (A.A.) or equivalent from 2-year college or technical school; or 4-years related experience and/or training; or
+ equivalent combination of education and experience.
PHYSICAL DEMANDS/WORK ENVIRONMENT
The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility. The environmental characteristic for this position is a warehouse setting. Candidates should be able to adapt to a traditional warehouse environment. Must be able to lift and carry up to 75 pounds and comply with OSHA standards
#LI-DT1
We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
Source : AAR