Advanced Maintenance Technician - 2nd Shift - Grenada, MS - Techtronic Industries North America, Inc.
Grenada, MS
About the Job
Adv Technician
Job Description:
_Advanced Maintenance Technician_ - 2nd shift.
Location: Grenada, MS
_The Advanced Maintenance Technician works in a specialized role in plant maintenance and is responsible for troubleshooting, maintenance, repair, and support of all facility and cell machines, PLC’s, and electronics._
_This position will be responsible for knowing and implementing all area specific compliance issues, including quality (ISO 9000), environmental (ISO 14000), safety and METCO/plant policies. This position will contribute to team efforts by participating in continuous improvement projects as required. This position will also assist with training coworkers as necessary._
You’ll also be DISRUPTIVE through these duties and responsibilities:
+ Perform minor preventative maintenance on equipment, such as checking/filling oil level, greasing.
+ Perform routine facility maintenance such as painting, maintaining interior & exterior lighting, maintaining grounds, changing AC filters, clean coils under direct supervision of Qualified HVAC Technician, cleaning and painting equipment, AC ductwork, etc.
+ Perform light construction work, install conduit and assist with minor electrical work such as pulling wire.
+ Perform grounds maintenance, plant clean-up and housekeeping.
+ Develop wiring diagrams, install wiring and document controls for electrical circuit, pneumatic, and mechanical equipment and systems, relocating equipment as needed to meet all production standards and electrical code (NEC).
+ Troubleshoot production and maintenance problems, performing needed repairs and adaptations of equipment such as changing air, grease and coolant lines, switches, belts and guards.
+ Provide preventive and predictive maintenance utilizing computer maintenance management system.
+ Identify potential work failures and initiate corrective action.
+ Perform general maintenance fabricating in wood, metal, plastic, etc, along with mig, tig and stick welding. (Example: tables, devices, etc.).
+ Respond to operators requests and contact other support personnel as needed.
+ Ensure transfer of information to appropriate shift and plant-wide personnel.
+ Rebuild and/or replace broken or damaged parts and rewire machines as required.
+ Read and interpret electrical components and systems, as well as electrical, pneumatic & hydraulic symbols/schematics. Repair, replace and troubleshoot electronic components and systems as needed.
+ Perform PLC maintenance. Read, interpret and troubleshoot PLC issues.
+ Perform preventative maintenance (PM) responsibilities. Participate in updates of PM schedules. Complete routine equipment inspections and complete required documentation.
+ Complete other duties as assigned by the manager, including working other shifts as necessary.
+ Initiate and implement problem resolution without focused direction from management.
+ Troubleshoot and repair electronic boards and CNC drives.
+ Construct machine frames or safety protection guards as needed.
+ Act as technical expert/consultant for all cells/facilities for problem resolution.
+ Oversee installation or relocation of equipment.
+ Program/troubleshoot/maintain servo control systems.
+ Develop, debug and maintain PLC ladder logic for new & existing machinery through use of PLC maintenance software.
+ Develop and maintain drawings for wiring diagrams through the use of AutoCAD.
+ Interface with CNC machines or production equipment for program and parameter installs.
+ Work with outside OEM equipment manufacturers and hydraulic/pneumatic/electrical vendors to resolve problems.
+ Ability to work alone or in team setting to resolve problems.
+ Create/modify OIT (operator interface terminal).
What TOOLS you’ll bring with you:
+ Associate’s degree in a technical field or equivalent combination of education and experience.
+ Must have at least two years in a senior maintenance tech role. Must be a certified forklift operator.
+ Must be proficient in the use of CAD, PLC ladder maintenance software. Qualified to work with electrical circuits to 600v/2500amp.
_Milwaukee Tool is an equal opportunity employer._
Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled
We endeavor to make this site accessible to any and all users. If you need to contact us regarding technical accessibility of our website call 443-391-1542. This number is only for technical accessibility issues, not general employment or job posting inquiries.
Job Description:
_Advanced Maintenance Technician_ - 2nd shift.
Location: Grenada, MS
_The Advanced Maintenance Technician works in a specialized role in plant maintenance and is responsible for troubleshooting, maintenance, repair, and support of all facility and cell machines, PLC’s, and electronics._
_This position will be responsible for knowing and implementing all area specific compliance issues, including quality (ISO 9000), environmental (ISO 14000), safety and METCO/plant policies. This position will contribute to team efforts by participating in continuous improvement projects as required. This position will also assist with training coworkers as necessary._
You’ll also be DISRUPTIVE through these duties and responsibilities:
+ Perform minor preventative maintenance on equipment, such as checking/filling oil level, greasing.
+ Perform routine facility maintenance such as painting, maintaining interior & exterior lighting, maintaining grounds, changing AC filters, clean coils under direct supervision of Qualified HVAC Technician, cleaning and painting equipment, AC ductwork, etc.
+ Perform light construction work, install conduit and assist with minor electrical work such as pulling wire.
+ Perform grounds maintenance, plant clean-up and housekeeping.
+ Develop wiring diagrams, install wiring and document controls for electrical circuit, pneumatic, and mechanical equipment and systems, relocating equipment as needed to meet all production standards and electrical code (NEC).
+ Troubleshoot production and maintenance problems, performing needed repairs and adaptations of equipment such as changing air, grease and coolant lines, switches, belts and guards.
+ Provide preventive and predictive maintenance utilizing computer maintenance management system.
+ Identify potential work failures and initiate corrective action.
+ Perform general maintenance fabricating in wood, metal, plastic, etc, along with mig, tig and stick welding. (Example: tables, devices, etc.).
+ Respond to operators requests and contact other support personnel as needed.
+ Ensure transfer of information to appropriate shift and plant-wide personnel.
+ Rebuild and/or replace broken or damaged parts and rewire machines as required.
+ Read and interpret electrical components and systems, as well as electrical, pneumatic & hydraulic symbols/schematics. Repair, replace and troubleshoot electronic components and systems as needed.
+ Perform PLC maintenance. Read, interpret and troubleshoot PLC issues.
+ Perform preventative maintenance (PM) responsibilities. Participate in updates of PM schedules. Complete routine equipment inspections and complete required documentation.
+ Complete other duties as assigned by the manager, including working other shifts as necessary.
+ Initiate and implement problem resolution without focused direction from management.
+ Troubleshoot and repair electronic boards and CNC drives.
+ Construct machine frames or safety protection guards as needed.
+ Act as technical expert/consultant for all cells/facilities for problem resolution.
+ Oversee installation or relocation of equipment.
+ Program/troubleshoot/maintain servo control systems.
+ Develop, debug and maintain PLC ladder logic for new & existing machinery through use of PLC maintenance software.
+ Develop and maintain drawings for wiring diagrams through the use of AutoCAD.
+ Interface with CNC machines or production equipment for program and parameter installs.
+ Work with outside OEM equipment manufacturers and hydraulic/pneumatic/electrical vendors to resolve problems.
+ Ability to work alone or in team setting to resolve problems.
+ Create/modify OIT (operator interface terminal).
What TOOLS you’ll bring with you:
+ Associate’s degree in a technical field or equivalent combination of education and experience.
+ Must have at least two years in a senior maintenance tech role. Must be a certified forklift operator.
+ Must be proficient in the use of CAD, PLC ladder maintenance software. Qualified to work with electrical circuits to 600v/2500amp.
_Milwaukee Tool is an equal opportunity employer._
Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled
We endeavor to make this site accessible to any and all users. If you need to contact us regarding technical accessibility of our website call 443-391-1542. This number is only for technical accessibility issues, not general employment or job posting inquiries.
Source : Techtronic Industries North America, Inc.