Forklift Operator at JobsRUs.com
Houston, TX
About the Job
JobsRUs.com. is seeking to hire a Forklift Operator for our client in Houston TX!
Benefits Available!
Weekly Pay!
$17.00/Hour
Shift Details: 6:00 AM – 4:00 PM
DESCRIPTION:
NOTE: All workers will be subjected to Temperature Monitoring prior to entering the facility. Face Covering Required at all times while at facility. Attire- Non-Logo Tee Shirt Red, Blk, or Grey- Non Log Baseball cap if applicable Proper safety footwear required (steel toe, puncture resistant sole, and provide above the ankle protection) as specifically stated below: Foot Protection • Provide ANSI Z41-compliant or local country-equivalent protective footwear. • CCSWB Safety Shoe Specification: Puncture Resistant (Kevlar bottom); Class 75 protective toe; Slip-resistant soles that meet Mark II LS-oily/wet test at .35/higher and a minimum of 6” inches or higher.
Responsible for moving product or materials in a production or warehouse environment using powered tools and vehicles.
Operate industrial vehicles and equipment.
Transport raw materials, full goods and/or finished goods to designated area.
Load and unload designated trailers and/or route trucks.
Ensure compliance with regulatory and company policies and procedures.
Move product and/or materials manually as required. Skills/ Requirements
High School diploma or GED preferred.
0 - 3 year of general work experience required.
1+ year prior warehouse/stocking/forklift experience preferred.
Previous experience within high-speed industrial environment a plus.
Ability to operate a manual / powered pallet jack or lift product.
Demonstrated attention to detail.
Forklift certification is preferred.
CCSWB Safety specification applies to all Manufacturing, Manufacturing-Combo’s, Distribution/Sales Centers, Fleet and Warehouse facility areas. This policy also applies to all associates that perform job tasks/functions that require the use of Personal Protective Equipment (PPE) at Client up to and including all Commercial, Sales and Administrative Job functions contingent upon required work area(s) and/or required job task(s) being performed. The provisions of the Personal Protective Equipment Program apply to all Client personnel, visitors, contractors, suppliers, vendors, and temporary workers.
NOTE: STEEL TOE BOOTS REQUIRED
Safety Boots are required while conducting specific job task(s) in Production, Distribution, Warehouse and Sales operations.
All footwear MUST be a minimum of 6” high, no Low-Cut shoes should be worn. Temp Laborers don’t have access to the order shoes from Lehigh. That’s only for CCSWB associates.
All footwear MUST be Puncture Resistant (Kevlar Bottom).
All footwear MUST have a Class 75 Protective Toe (Steel or Composite Toe)
All footwear MUST have slip-resistant soles that meets requirements.
Proper safety footwear is required (steel toe, puncture resistant sole, and provide above the ankle protection) as specifically stated below:
Foot Protection
Provide ANSI Z41-compliant or local country-equivalent protective footwear.
CCSWB Safety Footwear Specification: Puncture Resistant (Kevlar bottom); Class 75 protective toe; Slip-resistant soles that meet Mark II LS-oily/wet test at .35/higher and a minimum of 6” inches or higher.
Benefits Available!
Weekly Pay!
$17.00/Hour
Shift Details: 6:00 AM – 4:00 PM
DESCRIPTION:
NOTE: All workers will be subjected to Temperature Monitoring prior to entering the facility. Face Covering Required at all times while at facility. Attire- Non-Logo Tee Shirt Red, Blk, or Grey- Non Log Baseball cap if applicable Proper safety footwear required (steel toe, puncture resistant sole, and provide above the ankle protection) as specifically stated below: Foot Protection • Provide ANSI Z41-compliant or local country-equivalent protective footwear. • CCSWB Safety Shoe Specification: Puncture Resistant (Kevlar bottom); Class 75 protective toe; Slip-resistant soles that meet Mark II LS-oily/wet test at .35/higher and a minimum of 6” inches or higher.
Responsible for moving product or materials in a production or warehouse environment using powered tools and vehicles.
Operate industrial vehicles and equipment.
Transport raw materials, full goods and/or finished goods to designated area.
Load and unload designated trailers and/or route trucks.
Ensure compliance with regulatory and company policies and procedures.
Move product and/or materials manually as required. Skills/ Requirements
High School diploma or GED preferred.
0 - 3 year of general work experience required.
1+ year prior warehouse/stocking/forklift experience preferred.
Previous experience within high-speed industrial environment a plus.
Ability to operate a manual / powered pallet jack or lift product.
Demonstrated attention to detail.
Forklift certification is preferred.
CCSWB Safety specification applies to all Manufacturing, Manufacturing-Combo’s, Distribution/Sales Centers, Fleet and Warehouse facility areas. This policy also applies to all associates that perform job tasks/functions that require the use of Personal Protective Equipment (PPE) at Client up to and including all Commercial, Sales and Administrative Job functions contingent upon required work area(s) and/or required job task(s) being performed. The provisions of the Personal Protective Equipment Program apply to all Client personnel, visitors, contractors, suppliers, vendors, and temporary workers.
NOTE: STEEL TOE BOOTS REQUIRED
Safety Boots are required while conducting specific job task(s) in Production, Distribution, Warehouse and Sales operations.
All footwear MUST be a minimum of 6” high, no Low-Cut shoes should be worn. Temp Laborers don’t have access to the order shoes from Lehigh. That’s only for CCSWB associates.
All footwear MUST be Puncture Resistant (Kevlar Bottom).
All footwear MUST have a Class 75 Protective Toe (Steel or Composite Toe)
All footwear MUST have slip-resistant soles that meets requirements.
Proper safety footwear is required (steel toe, puncture resistant sole, and provide above the ankle protection) as specifically stated below:
Foot Protection
Provide ANSI Z41-compliant or local country-equivalent protective footwear.
CCSWB Safety Footwear Specification: Puncture Resistant (Kevlar bottom); Class 75 protective toe; Slip-resistant soles that meet Mark II LS-oily/wet test at .35/higher and a minimum of 6” inches or higher.