Primary Purpose: - Plan, design, program, implement and support monitoring and control systems utilized in the operation of natural gas pipeline compressor stations and related facilities.
Responsibilities:
- Design, program, test and maintain PLC/RTU based automation systems (Primarily Allen Bradley PLC, Siemens PLC and Bristol Babcock 33xx RTU systems).
- Design, program, test and maintain PC based HMI systems (Primarily Wonderware/AVEVA InTouch 9.5, InTouch 2012, InTouch 2014R2 and InTouch 2020 systems).
- Design and implement automation system networks, including specifying and configuring communications protocols, communications media and associated hardware.
- Read and interpret electrical, control and instrumentation drawings and provide reviews of design/construction drawing packages.
- Interface with other technical/engineering disciplines to ensure the effective integration of automation systems with the overall product design.
- Provide technical expertise in mechanical, instrument, electrical, and/or automation specifications and standards as required.
- Specify and procure instrumentation and controls related equipment used in automation systems.
- Provide on-site services, including oversight of system installation, leading commissioning efforts and supplying troubleshooting support as required.
- Develop contractor bid documents, conduct bid process, select contractor and manage contractor throughout automation capital projects.
- Develop and control capital projects. Specifically, develop and control project scope, schedule, projected costs, risk management, and quality assurance programs as required to manage capital projects ranging from $20,000 to over $2,000,000.
- Provide engineering support to Operations and Technical Support Personnel for all related software and hardware, including end devices.
- Accountable for completing tasks with quality, in compliance with applicable codes and standards, and on schedule.
Required: - Bachelor of Science degree in engineering from an accredited university. Five years commensurate experience with emphasis in compressor station automation design, project management and technical analysis as described may be acceptable in lieu of engineering degree.
- Minimum of three years of Instrumentation and Control Engineering, Systems Integration or related/applicable experience. Experience should be heavily weighted towards programming, commissioning and maintaining complex industrial control systems.
- Extensive, proven experience in successfully designing and programming Allen Bradley and/or Siemens PLC systems.
- Proven experience in configuring and developing HMI applications in various versions of Wonderware/Aveva InTouch and in utilizing ArchestrA System Platform.
- Ability to learn additional and/or new programming languages and skills as needed.
- Ability to read and interpret electrical and mechanical drawings and diagrams, electrical schematics, piping and instrument drawings (P&IDs), flow charts and cause and effect diagrams.
- Ability to perform job responsibilities with minimal guidance or supervision.
- Proficiency in basic engineering skills and possession of well-developed analytical and problem solving skills to address complex technical matters.
- Must maintain a high degree of attention to detail while managing multiple assignments with various deadlines and responsibility levels.
- Must have excellent communication and interpersonal skills and the ability to work with both company and non-company personnel to accomplish goals.
- PC-based skills, including MS Office products (Word, Excel, Outlook, Access, Power Point and Project).
- Travel (5% - 50%), often overnight, to contractor or Kinder Morgan sites for system installation, commissioning and maintenance, as well as to attend meetings and conferences. Weekend travel is occasionally required.
- Required to carry a company-provided cell phone and be available to respond during working hours and occasionally during non-working hours.
- Job requires ascending/descending stairs, ladders and ramps, often while carrying loads up to 20 pounds (laptop, instruments, tools, etc.), as well as the ability to reach and work above head and below waist levels. Familiarity and working knowledge of DMMs, oscilloscopes, wire tracing tools and basic hand tools is also required.
- Must be aware of company and government safety regulations and maintain a high regard for the safety of company employees and assets, and the general public.
- Must possess and maintain a valid driver's license and a driving record satisfactory to the company and its insurers.
- The successful candidate will be required to clear a drug screen and complete a background check after an offer has been extended and prior to employment.
Preferred:
- Knowledge and experience in the design and operation of automation systems for natural gas facilities, including compressor stations, storage facilities and processing facilities.
- Experience in designing and implementing communications networks, utilizing a variety of communication protocols, including but not limited to Ethernet, ControlNet, DH+, DF-1, Modbus and Profibus.
- Experience with designing and specifying physical media used in communications, including but not limited to copper cabling, fiber optic cabling and radio transmission.
- Design and construction knowledge of electrical hazardous area applications (Class 1, Div 1 and 2).
- Knowledge and/or application experience with national and international instrument, electrical and controls standards.
- Specific knowledge and application experience as a project manager in a commercial environment.
- Working knowledge of and programming skills for the Bristol Babcock 33xx and ControlWave series of controllers.
**Position may be filled at various levels depending upon experience and job skills of the successful candidate.** - This position has the opportunity to work a hybrid schedule, with work conducted in the office Monday through Wednesday and work from home Thursday and Friday.
- This position also has the opportunity to work a flexible work schedule, with 9 hours work days Monday through Thursday and either 4 hour work days every Friday or 8 hour work days every other Friday.
The above statements describe the general nature and level of work being performed. This position may perform other duties as assigned. Position may be filled at various levels depending on experience and job skills of the successful candidate.
Kinder Morgan, Inc. offers employees a comprehensive benefits package. Benefits offered for this position may include the following: health care benefits including medical, prescription drug, dental, and vision coverage; Flexible and Health Spending Accounts; Life and Accidental Death and Disability insurance; Supplemental Life and Accidental Death and Disability insurance for employee and dependents; retirement benefits including a 401(k) with employer and employee contributions and a company-funded pension plan; paid time off; paid parental bonding leave; paid holidays; a flexible work schedule and many voluntary benefit plans.
Kinder Morgan provides equal employment opportunity to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, disability, genetic information, citizenship or status as a protected veteran or any other legally protected statusEQUAL OPPORTUNITY EMPLOYER STATEMENT: We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. |