2105CF-Aircraft Electrician/Avionics - Apollo Professional Solutions
Jacksonville, FL 32221
About the Job
Position Type: Aircraft Electrician
Location: Jacksonville, FL
Hourly rate: $31.85
Contractor benefits: Medical, Vision, Dental, 401k
Job Description:
This position requires an individual to work at heights utilizing fall protection equipment. Candidate must be able to obtain Fall Protection Certification. This is also contingency of assignment - Fall Protection Regulations - OSHA 1926, 191066, 1910 Subpart D.
Primary Responsibilities:
Proficiency reading wire schematics and diagrams
Perform bonding, resistance checks, and continuity checks
Ability to locate correct wire routing on system installs
Independently perform AC/DC power checks
Ability to complete proper wire installation with applicable drawing, including: proper spacing, proper use of cable ties and lacing tape, bundle opening, connector removal and installation, and special cable care
Ability to perform basic wiring termination (i.e., wire striping std ring terminals and stud build up, connector pins/sockets, splices/proper spacing, shield ferrule/sleeve (solder and crimp type), standard coaxial connectors, and shielded twisted pair splicing
Ability to utilize electrical and measuring tools including: environmental crimpers, Daniels large and small crimpers, AMP crimper, Burndy crimper, megohmmeter, multimeter, strippers, push-pull scale, weigh scale, and bond meters
Knowledge of how to properly install fiber optics, coaxial cable, quadrax, etc.
Perform Air Data Testing using proper assistance
Perform scheduled maintenance tasks, defect rectification, modifications, repairs and functional tests on Avionic and Electrical systems
Highlight any technical issues, discrepancies or other issues to the lead and manager
General Responsibilities:
Strive for an efficient work effort in all assigned tasks
Strive for First Time Quality on all assigned work
Follow the guidance and direction from lead, and senior Subject Matter Experts (SME)
Execute all duties while wearing required safety equipment
Complete required company and specific statement of work training requirements
Maintain necessary certifications, licenses and permits as required for assigned work.
Demonstrate a safe work ethic
Perform detailed tool inventories daily
Communicate using basic computer systems including but not limited to Microsoft Office as needed to complete essential job requirements
Contribute positively to our open and honest reporting culture
Report all incidents and occurrences in the Boeing Safety Management System.
Ensure compliance with regulatory requirements, company processes and procedures
Maintain a high standard of organization and cleanliness within assigned work areas, Clean as You Go
Contribute to continuous improvement initiatives
Be flexible to ensure aircraft are delivered on time to customer
Perform other duties as directed by management for the benefit of the company, program or employee(s)
Be an effective team member displaying appropriate behaviors including Equity, Diversity and Inclusion
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Basic Qualifications (Required Skills/Experience):
3+ years of Aircraft Mechanic (Experience in either commercial or defense or relevant trade apprenticeship would be considered)
3+ years experience in reading and understanding engineering drawings, blueprints, schematics and specifications
Computer proficiency including Microsoft Office Suite
Preferred Qualifications (Desired Skills/Experience):
FAA certification in Airframe and/or Power Plant is desirable
Knowledge of general aircraft maintenance and environment processes (Human Factors, FOD control, tool control, health & safety & COSHH)
Typical Education & Experience:
High school diploma or GED or 3+ years of industry or military experience
Comments
100% on site in Jacksonville, FL.
Physical requirements: Standard workplace requirements to climb ladders, enter confined space, and ability to lift up to 35 lbs.
Successful completion of training is a contingency for this assignment - OJT or formal classroom training.
Must be U.S. Person for purposes of Export Compliance.
EEO Statement Apollo Professional Solutions, Inc. is an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, marital status, age, national origin, ancestry, disability status, medical condition, pregnancy, genetic information, protected veteran status, gender, sexual orientation, gender identity or expression, or any other status or characteristic protected under federal, state, or local law.
#MWL
Location: Jacksonville, FL
Hourly rate: $31.85
Contractor benefits: Medical, Vision, Dental, 401k
Job Description:
This position requires an individual to work at heights utilizing fall protection equipment. Candidate must be able to obtain Fall Protection Certification. This is also contingency of assignment - Fall Protection Regulations - OSHA 1926, 191066, 1910 Subpart D.
Primary Responsibilities:
Proficiency reading wire schematics and diagrams
Perform bonding, resistance checks, and continuity checks
Ability to locate correct wire routing on system installs
Independently perform AC/DC power checks
Ability to complete proper wire installation with applicable drawing, including: proper spacing, proper use of cable ties and lacing tape, bundle opening, connector removal and installation, and special cable care
Ability to perform basic wiring termination (i.e., wire striping std ring terminals and stud build up, connector pins/sockets, splices/proper spacing, shield ferrule/sleeve (solder and crimp type), standard coaxial connectors, and shielded twisted pair splicing
Ability to utilize electrical and measuring tools including: environmental crimpers, Daniels large and small crimpers, AMP crimper, Burndy crimper, megohmmeter, multimeter, strippers, push-pull scale, weigh scale, and bond meters
Knowledge of how to properly install fiber optics, coaxial cable, quadrax, etc.
Perform Air Data Testing using proper assistance
Perform scheduled maintenance tasks, defect rectification, modifications, repairs and functional tests on Avionic and Electrical systems
Highlight any technical issues, discrepancies or other issues to the lead and manager
General Responsibilities:
Strive for an efficient work effort in all assigned tasks
Strive for First Time Quality on all assigned work
Follow the guidance and direction from lead, and senior Subject Matter Experts (SME)
Execute all duties while wearing required safety equipment
Complete required company and specific statement of work training requirements
Maintain necessary certifications, licenses and permits as required for assigned work.
Demonstrate a safe work ethic
Perform detailed tool inventories daily
Communicate using basic computer systems including but not limited to Microsoft Office as needed to complete essential job requirements
Contribute positively to our open and honest reporting culture
Report all incidents and occurrences in the Boeing Safety Management System.
Ensure compliance with regulatory requirements, company processes and procedures
Maintain a high standard of organization and cleanliness within assigned work areas, Clean as You Go
Contribute to continuous improvement initiatives
Be flexible to ensure aircraft are delivered on time to customer
Perform other duties as directed by management for the benefit of the company, program or employee(s)
Be an effective team member displaying appropriate behaviors including Equity, Diversity and Inclusion
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Basic Qualifications (Required Skills/Experience):
3+ years of Aircraft Mechanic (Experience in either commercial or defense or relevant trade apprenticeship would be considered)
3+ years experience in reading and understanding engineering drawings, blueprints, schematics and specifications
Computer proficiency including Microsoft Office Suite
Preferred Qualifications (Desired Skills/Experience):
FAA certification in Airframe and/or Power Plant is desirable
Knowledge of general aircraft maintenance and environment processes (Human Factors, FOD control, tool control, health & safety & COSHH)
Typical Education & Experience:
High school diploma or GED or 3+ years of industry or military experience
Comments
100% on site in Jacksonville, FL.
Physical requirements: Standard workplace requirements to climb ladders, enter confined space, and ability to lift up to 35 lbs.
Successful completion of training is a contingency for this assignment - OJT or formal classroom training.
Must be U.S. Person for purposes of Export Compliance.
EEO Statement Apollo Professional Solutions, Inc. is an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, marital status, age, national origin, ancestry, disability status, medical condition, pregnancy, genetic information, protected veteran status, gender, sexual orientation, gender identity or expression, or any other status or characteristic protected under federal, state, or local law.
#MWL
Source : Apollo Professional Solutions